Operation Manual

1-9

This machine provides an energy saver function. When no operations are performed for about 5 minutes, the

machine automatically enters the energy saver mode.

• The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30

minutes. You can also turn off the energy saver function. (

→ p. 8-4)

• The energy saver function does not activate when the machine is in the following status:

– When printing out copies, faxes* or other pages

– When sending or receiving faxes*

– While a copy job is saved in memory or when the reserve copy or other functions are operating, or

when the In Use/Memory indicator lights up*

– When paper jams occur

– When an error code appears and the Alarm indicator flashes

– When no paper is loaded in the cassette or multi-purpose tray

– When

PRESS OK KEY is displayed

*Only for the FAX-L400 model

Setting the Energy Saver Mode Manually

Press Energy Saver.

• The LCD is turned off and the Energy Saver key lights up.

• Right after the machine is restored from the energy saver mode, or right after copying finishes, wait

about 2 seconds before pressing

Energy Saver.

Restoring from the Energy Saver Mode

Press Energy Saver.

• The Energy Saver key goes off and the machine enters standby mode.

• The machine can be restored from the energy saver mode immediately. However, it may vary according

to room temperature and circumstances.

NOTE

Energy Saver Mode

Introduction

Downloaded from www.Manualslib.com manuals search engine