User Manual

Cleaning the Transfer Corotrons ().
Caution:
Before cleaning, observe the safety directives in the ‘Cleaning the Printing System - Overview’
on page 130 section.
Note:
Corotrons can only be cleaned when printing is stopped.
To Clean the Transfer Corotrons with the Cleaning Rod
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Stop' button.1.
Open the door at the front of the printing system.2.
Press down the locking lever of
the waste toner bottle holder.
3.
Swivel off waste toner bottle
holder.
4.
Chapter 7 - Cleaning the Printing System 145
Cleaning the Transfer Corotrons ().