User Manual

Installing Resources
Requirement
The Key Operator or an operator authorized by the Key Operator must be logged on.
To Install a Resource
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Stop' button.1.
Deactivate all channel links to the host. To do this, click the following button
in the 'Channels' menu for the respective channel:
2.
Insert the USB memory stick with the setups into the USB port. The USB
connection is on the right side of the operating console.
3.
On the operator panel, select:
■
For I mode:
'VarioStream' -> 'Emulations' -> 'I mode' -> 'Resource management' menu
■
For PCL mode:
'VarioStream' -> 'Emulations' -> 'PCL mode' -> 'Resource management'
menu
4.
Chapter 5 - Working with the Operator Panel106
Installing Resources