Cooker Use and Installation Instructions

INSTALLATION AND OPERATIONAL CHECKS

After installation, check for gas soundness. The supply pressure can be checked at the

grill injector. Access to the injector is by first removing the baffle at the front of the grill

fastened by two screws. Then remove the fastening screw on the right hand side of the

burner and slide the burner off the injector. Ensure that the grill burner is correctly

located under the fixing screw on reassembly.

Fit the hotplate burner bodies, enamelled discs and pan supports. Referring to the

instructions for use where necessary,

1. Check that the hotplate and grill burners ignite correctly and burn with a

steady flame. Check for a steady flame on the low setting.

2. Check that with the oven set to mark 9, the burner ignites at low rate, and

then increases to full rate within 60 seconds. Leave the oven full on with

the door closed for 10 minutes, and check that when the control is turned to

the ‘Slow Cook’ setting that the flame reduces. Check that the oven light operates.

3. Check the operation of the timer.

Instruct the user on the operation of the cooker.

INSTALLATION INSTRUCTIONS