User Guide

4–31
COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
MECHANICAL SYSTEM
6. Points to Note
a. The collars for the pick-up roller are identified by
color; use the gold collar for the front, and the
silver collar for the rear.
b. Do not separate the rubber portion of the pick-
up roller from the collar.
7. Removing the Feeding Roller
1) Remove the pick-up roller from the front.
2) Remove the mounting screw q, and remove
the pick-up roller arm bushing w.
Figure 4-363
3) Remove the pick-up roller arm e and the weight
r from the pick-up roller shaft.
Figure 4-364
1
2
3
4
4) Remove the stop ring t from the feeding roller.
Figure 4-365
5) Remove the pick-up roller from the rear, and
remove the pick-up roller shaft from the bushing
at the rear.
6) Remove the drive belt y from the feeding roller
u, and remove the feeding roller and the roller
shaft i.
Figure 4-366
5
6
7
8
Download service manual and resetter printer at http://printer1.blogspot.com