User Guide

CHAPTER 4 IMAGE FORMATION SYSTEM

1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

4-21

Figure 4-115

4) While the display is indicating ‘F’, stop shorting JP103 and JP104.

5) Select ‘40’ in service mode.

• The display will indicate ‘40’.

6) Press the Copy Start key.

• The scanner will move forward, and the scanning lamp will turn on.

7) Turn VR103 on the DC controller PCB fully clockwise.

SERVICE

JP104

JP103

AE GAIN

VR103

J131

J101

J130

VR102

REF

J107

J103

J104

2) Close the top unit, and connect the flexible cable from the control panel to the DC controller

PCB; then, turn on the power switch.

3) Check to make sure that AE mode has been enabled, and short JP103 and JP104 on the DC

control PCB with a screwdriver or the like.

• The display will indicate ‘F’.

Figure 4-116

Download Service Manual And Resetter Printer at http://printer1.blogspot.com