Service manual

5-50
CHAPTER 5 PICK-UP/FEEDING SYSTEM
COPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Disconnect the connector r and the stop ring t of the feeding roller; then, pull out
the pick-up roller unit y and the feeding roller u at the same time.
Figure 5-709
Reference:
Whenever installing the feeding roller q to the pick-up assembly, be sure so that
the gear w attached to the feeding roller is toward the rear of the copier.
Figure 5-710
u
t
yr
w
q
(front of copier)