User Guide

CHAPTER 7 EXTERNAL/AUXILIARY MECHANISMS
COPYRIGHT © 1999 CANON INC. CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-10
3. Exhaust Fan (FM2)
1) Open the front door, and detach the drum
unit.
2) Detach the rear cover.
3) Disconnect the connector (J310) from the
DC controller PCB, and remove the two
screws.
4) Detach the ozone filter and the inside
cover; then, lower the feeder assembly.
5) Hold the exhaust fan assembly on its bot-
tom, and remove the two screws; then,
pull the assembly to the front.
[1]
[2] [2]
[2]
[1]
[1] Connector [2] Screw
Figure 7-212
[1] Screws [2] Exhaust fan
Figure 7-213