Manual

then specify the automatic reception start time.
Refer to the on-screen manual:
A
dvanced Guide
.
If the telephone connecting to the machine is located away from the machine, pick up the
handset of the telephone connecting to the machine and dial 25 (the remote reception ID) to
receive faxes (remote reception). The remote reception is only available for the touch tone
dial. The remote reception can be disabled.
Refer to the on-screen manual:
A
dvanced Guide
.
Set your answering machine to answering mode and adjust it as follows:
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
If you have subscribed to Duplex Ringing service in Hong Kong, the machine will receive faxes
automatically even if you set the receiving mode of the machine to TEL priority mode.
When DRPD is selected:
For Distinctive Ring Pattern Detection (DRPD):
When the receive mode is DRPD, receive a call as follows.
1.
A fax or voice call incomes.
The machine judges whether call is voice or fax by the ringing pattern. In the meanwhile the telephone rings.
2.
Receive the fax or voice call.
Fax: The machine will receive it automatically when the machine detects the registered fax ring pattern.
Voice call: The telephone continues to ring. Pick up the handset to answer the call.
Note
If you selected DRPD, you need to select the appropriate ring pattern on the machine. For
details, see
Setting the DRPD Ring Pattern (US and Canada only)
.
When Network switch is selected
When the receive mode is Network switch, receive a call as follows.
Page 90 of 997 pagesReceiving Faxes