Manual

1.
Display the One-touch speed dial screen.
(1)
Press the
FAX
button, and press the Menu button.
(2)
Use the (Left) or (Right) button to select TEL number registration
, and
press the
OK
button.
(3)
Use the
(Up) or
(Down) button to select One-touch speed dial, and press
the
OK
button.
2.
Register a recipient's number to the one-touch speed dial.
(1)
Use the
(Up) or
(Down) button to select an unoccupied one-touch speed
dial number (01 to 05), and press the
OK
button.
Note
Select an unoccupied number to register a new recipient's number.
The message asking whether to edit or delete the registered information will appear if an
occupied number is selected.
(2)
Use the Numeric buttons to enter a recipient's name (max. 16 characters,
including spaces).
(3)
Press the
OK
or (Down) button.
(4)
Use the Numeric buttons to enter the recipient's fax/telephone number (max. 60
digits (40 digits for Korea), including spaces).
(5)
Press the
OK
button.
The registered name will appear at the selected number on the One-touch speed dial screen.
Note
Press the
FAX
button to save the registered information and will return to the fax standby
screen.
Adjusting the Sending Quality
You can adjust the image quality (fax resolution) or density (scan contrast) of the document you send.
The higher you set the image quality setting, the better the output quality will be at the other end, but the
longer it will take for the transmission. Contrast is the degree of difference between light and dark.
Increasing the scan contrast thickens the whole fax image, or light penciled texts and such can be
thickened. Adjust the image quality and density according to the type of document you are sending.
1.
Press the
FAX button, and press the
FAX Quality
button.
Page 82 of 997 pagesSending Faxes