#0_ MV500/MV500i__E_cover 2/6/02 14:14 Page 1 PUB.DIE-168 DIGITAL VIDEO CAMCORDER E Instruction Manual CANON INC. Introduction Canon Europa N.V. P.O. Box 2262, 1180 EG Amstelveen, the Netherlands Mastering the Basics Canon UK Ltd. Ribcon Way Luton Bedfordshire LU4 9UR Telephone 0870-241-2161 Canon Australia Pty. Ltd 1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia Telephone 805-2000, Fax 887-4484 Using the Full Range of Features Canon New Zealand Ltd Fred Thomas Drive, Takapuna, P.O.
#1_ MV500/MV500i__E(02-06) 2/6/02 14:15 Page 2 Important Usage Instructions WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. E Introduction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
#1_ MV500/MV500i__E(02-06) 2/6/02 14:15 Page 3 Contents Introduction Mastering the Basics Finding Your Way Around the MV500/MV500i..............................7 ~ Preparations ~ Attaching the Ferrite Core........................10 Powering Your Camcorder ......................11 Loading a Cassette ..................................16 ~ Basic Recording ~ Basic Recording ......................................18 Zooming ..................................................23 Using the LCD Screen ..........
#1_ MV500/MV500i__E(02-06) 2/6/02 14:15 Page 4 For quick reference Introduction E In addition to the contents and index please refer to: • Finding Your Way Around the MV500/MV500i ( 7) • Screen displays ( 111) • Troubleshooting — in case you run into any problems ( 105) • Menu at a Glance ( 120) Symbols used in this instruction manual: : Reference page numbers : Functions that can be operated from the body of the camcorder : Functions that can be operated from the wireless controller : Supplementary
#1_ MV500/MV500i__E(02-06) 2/6/02 14:15 Page 5 Thank you for Choosing a Canon To get the most out of your new camcorder, we recommend that you read this manual thoroughly — there are many sophisticated features which will add to your recording enjoyment.
#1_ MV500/MV500i__E(02-06) 2/6/02 14:15 Page 6 Introducing the MV500/MV500i Compact and Stylish Introduction E The MV500/MV500i is small and light. Many various functions are condensed into its compact body. Also, the slim and stylish design makes it easy to carry and use and shooting videos a pleasure. 18× Lens and 360× Digital Zoom From wide-angle to 18× telephoto—with unparalleled optical quality. The digital zoom magnifies this up to 360× for even more dramatic results.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 7 Finding Your Way Around the MV500/MV500i E REC (record) SEARCH – button(p. 38)/ Record review button (p. 38)/ (rewind) button (p. 28) REC SEARCH + button (p. 38)/ (fast forward) button (p. 28) AE SHIFT button (p. 65)/ (stop) button (p. 28) Mastering the Basics FOCUS button (p. 68)/ (play/pause) button (p. 28) LCD panel OPEN button (p. 25) BATT. (battery) RELEASE button (p. 13) LCD screen (p. 25) Backup battery cover (p. 100) Battery attachment unit (p.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 8 E Viewfinder focusing lever (p. 96) Viewfinder protect cover (p. 102) Mastering the Basics PHOTO button (p. 49) Accessory shoe (p. 88) Zoom controller (p. 23) Viewfinder (p. 96, 102) Speaker (p. 31) Strap attachment bar (p. 97) POWER indicator (p. 18) Start/Stop button (p. 19) Grip belt (p. 96) POWER switch (p. 18) C AM ER A } • OFF • PLAY(VCR) • POWER CAMERA OFF PLAY(VCR) Cassette compartment cover (p. 16) Cassette compartment (p.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 9 E Terminal cover Remote sensor (p. 43) Terminal cover (LANC) terminal (p. 76) S MV500: AV (audio/video) OUT terminal (p. 32)/ (phones) terminal (p. 32) MV500i: AV (audio/video) IN/OUT terminal (p. 32, 81)/ (phones) terminal (p. 32) DV MV500: DV OUT terminal (p. 77, 95) MV500i: DV IN/OUT terminal (p. 78, 95) AV DC IN 9.5V MV500: S-video OUT terminal (p. 34) MV500i: S-video IN/OUT terminal (p. 34, 81) Mastering the Basics Stereo microphone (p.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 10 Attaching the Ferrite Core E Attach the enclosed ferrite core before you connect the CA-560 Compact Power Adapter to the camcorder. Mastering the Basics Attach the ferrite core to the cable about 4 cm from the plug end (the plug to be connected to the camcorder) of the CA-560 Compact Power Adapter. 10 • Pass the cable through the centre of the core and wrap it around the core once, then close the unit until it clicks shut.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 11 Powering Your Camcorder Before operating your camcorder, you will need to use the power adapter to: E Provide power from a mains outlet or Charge a battery pack Connecting the camcorder to a mains outlet 1 Mastering the Basics Notes: • The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz) to the DC current used by your camcorder.
#2_MV500/MV500i__E(07-37) E 2/6/02 14:16 Page 12 Attaching and charging the battery packs 1 POWER CAMERA DC IN 9.5V OFF CHARGE PLAY(VCR) Mastering the Basics 3 2 3 4 CHARGE indicator Your battery pack was partially charged before it left the factory. It should have enough power for you to check that your camcorder is working properly. However, you must charge the battery pack fully if you want it to power the camcorder for more than a few minutes.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 13 6. Remove the battery pack after use. • Rotate the viewfinder upwards. • Press and hold the BATT. RELEASE button while you slide the battery up. E Notes: • Never connect an unspecified product to the camcorder’s DC terminal. Likewise, do not connect the power adapter to an unspecified product. • You can find detailed notes for using the batteries in the “Notes on Using the Batteries” ( 98).
#2_MV500/MV500i__E(07-37) E 2/6/02 14:16 Page 14 Using the Charge Adapter CR-560 Kit (optional) The Compact Power Adapter CA-560 included with the camcorder can be used along with the CR-560 Kit for 3 different ways to power the camcorder or charge battery packs: 1. Charge the BP-500 Series battery packs with power from your car battery. 2. Operate the camcorder with power from your car battery. 3. Charge the BP-500 Series battery packs from a household mains outlet.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 15 2. Operate the camcorder with power from your car battery. Camcorder + DC Cable + Charge Adapter + Car Battery Cable → car’s cigarette lighter Mastering the Basics To car’s cigarette lighter E 3. Charge the BP-500 Series battery packs from a mains outlet. 1 or 2 battery pack(s) + Charge Adapter + Compact Power Adapter CHARGE • Fast charging for the high-capacity BP-522 and BP-535 (both optional).
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 16 Loading a Cassette SH Mastering the Basics PU OPEN/EJECT E Only use videocassettes marked with the D logo.* Loading and unloading 1. Make sure that you have attached a power source. 2. Slide the OPEN / EJECT 5 switch (on the bottom of the camcorder) to release the cassette compartment cover. • Pull the cover fully open (while holding the button) and wait a couple of seconds for the cassette compartment to open automatically.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 17 Protecting tapes from accidental erasure E REC SAVE REC SAVE Mastering the Basics To protect your recording from accidental erasure, slide the tab on the cassette so that it exposes the hole. (This switch position is usually labelled SAVE or ERASE OFF.) If you load this cassette and put the camcorder in record pause mode ( 18), “THE TAPE IS SET FOR ERASURE PREVENTION” is displayed for approx. 4 seconds and then the v mark flashes in the display.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 18 Basic Recording E 3 1 POWER CAMERA OFF P PLAY(VCR) 4, 5 POWER CAMERA Mastering the Basics OFF PLAY(VCR) Before you start recording Have you completed the following steps? • Attached a power source ( 11). • Removed the lens cap ( 96). • Fasten the grip belt ( 96). • Chosen the display: viewfinder ( 96) or LCD screen ( 25).
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 19 2. Load a cassette ( 16). 3. Slide the program selector to [. E • This selects the camcorder’s Easy Recording program. It allows you to simply point and shoot without making any manual adjustments ( 52). 4. Press and release the start/stop button once to begin recording. • For still image recording to a cassette, see p. 49. 5. Press and release the start/stop button again to pause recording.
#2_MV500/MV500i__E(07-37) E 2/6/02 14:16 Page 20 Changing the recording mode You can record and play back a tape in SP (standard play) and LP (long play) modes. LP extends tape usage by 1.5 times. You can’t add sound (audio dubbing) or images (AV insert) to a tape that has been recorded in a mode other than SP mode. If you plan to use either of these functions later, record in SP mode.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 21 16:9 (Wide screen TV recording) Produces images in the 16:9 format for playback on wide screen TVs. E CAMERA CAM.SET UP 16:9••••••••OFF 39) To switch 16:9 to ON, open the menu and select CAM.SET UP. Then select 16:9, set it to ON and close the menu. Mastering the Basics ( Notes: • “16:9” is shown in the display when you switch the 16:9 mode on. • You cannot use the 16:9 mode with the Easy Recording program.
#2_MV500/MV500i__E(07-37) Mastering the Basics E 2/6/02 14:16 Page 22 Demonstration mode You can see a demonstration of the camcorder’s main features. To see the demonstration, do either of the following: • With no cassette inserted, turn the DEMO MODE on in the CAMERA menu and close the menu. • Leave the camcorder with no cassette inserted for five minutes after turning it on. CAMERA DISP.SET UP ( DEMO MODE••••ON 39) To turn the demonstration mode off, open the menu and select DISP. SET UP.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 23 Zooming Zoom in E Zoom out The camcorder’s zoom lens allows you to choose the best picture angle for each scene: • Move the zoom control towards W to zoom out to wide-angle. • Move it towards T to zoom in to telephoto. Mastering the Basics 18× optical zoom You can also control the speed of zooming: • Move the control slightly to zoom slowly. • Move it farther to zoom more quickly. (The farther you move the zoom control, the faster the zoom speed.
#2_MV500/MV500i__E(07-37) Mastering the Basics E 24 2/6/02 14:16 Page 24 Notes: • When zooming, as a rule, keep at least 1 m (3 ft 33/8 in) between you and your subject. However when the zoom is at the wide-angle position, you can focus on a subject as close as 1 cm (3/8 in). • Image resolution is slightly lower when the magnification is greater than 18×. • You cannot use digital zoom in the Night recording program. • The zoom indicator appears for 4 seconds.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 25 Using the LCD Screen Opening and closing the LCD screen E Mastering the Basics Slide the LCD panel OPEN button and open the panel by pulling it away from the camcorder. This automatically switches the LCD screen on and the viewfinder off. To close the LCD panel, press the upper right corner until it clicks securely closed. When you close the LCD panel, the LCD screen automatically switches off and the viewfinder switches back on.
#2_MV500/MV500i__E(07-37) Mastering the Basics E 2/6/02 14:16 Page 26 • Always rotate the LCD panel vertically into place, before closing it or pushing it flat against the side of the camcorder. • Always fully close the LCD panel until it clicks securely. • Be careful not to leave the LCD, viewfinder or lens exposed to direct sunlight outdoors or in a window. Doing so could cause damage. • Bright light falling on the LCD screen may cause glare that makes it difficult for you to view the image.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 27 Allowing the subject to monitor recording E Mastering the Basics When you turn the LCD panel so that it faces the same direction as the lens, you can watch yourself during recording or let your subject monitor recording. The viewfinder is also activated when the panel is in this position. (Adjust the viewfinder, 96) • You can choose the display style, reversed (mirror on) or not (mirror off).
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 28 Playing Back a Cassette E REC SEARCH REC SEARCH FOCUS AE SHIFT POWER CAMERA OFF Mastering the Basics PLAY(VCR) You can use the LCD screen for instant, on-the-spot playback. The camcorder also plays back the sound track via the built-in speaker ( 31). • When you play back a tape, you can also close the LCD panel with its screen side facing up. • When you’re using the viewfinder to view playback, close the LCD panel.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 29 Other playback modes Playback pause Press the a (pause) button. To resume normal playback, press it again, or press the e (play) button. The camcorder automatically goes into stop mode after about 5 minutes’ playback pause. Rewind playback For reverse playback at about 11.5 times normal speed, press and hold the ` (rewind) button during normal playback or press and hold the ` (rewind) button during normal rewind.
#2_MV500/MV500i__E(07-37) Mastering the Basics E 2/6/02 14:16 Page 30 Reverse Playback To play back in reverse at normal speed, press the –/4a button during normal forward playback. Press the PLAY e button to return to normal forward playback. • The camcorder automatically goes into stop mode after about 2 minutes of paused reverse playback. Forward ×2 Playback Press the ×2 button during normal playback. Press the PLAY e button to return to normal playback.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 31 Built-in speaker E The camcorder has a built-in speaker so you can review the sound track alongside the picture when you’re using the LCD screen to play back a tape. The built-in speaker is monaural. Mastering the Basics Adjust the speaker volume by turning the selector dial. • Turn the selector dial up to increase the volume, and down to lower the volume. • A bar appears in the display to indicate the current volume. It disappears in 4 seconds.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 32 Connections for Playback on a TV Screen E You can connect the camcorder to a TV or VCR in order to play back your recordings. You will need to attach a power source to the camcorder ( 11). Power off all devices before starting the connections. See your TV or VCR instruction manual for further details.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 33 If your TV (or VCR) has a SCART terminal (without S (S1)-video) E PC-A10 SCART Adapter AUDIO AUDIO VIDEO (R) (L/MONO) AV MIC STV-250N Stereo Video Cable Mastering the Basics • Connect the PC-A10 SCART adapter to the TV or VCR’s SCART terminal. • Connect the camcorder to the adapter. Connect the camcorder using the STV-250N Stereo Video Cable. Connect the white plug to the white audio terminal L (left).
#2_MV500/MV500i__E(07-37) E 2/6/02 14:16 Page 34 If your TV (or VCR) has an S (S1) -video input terminal For higher picture quality, we recommend playing back recordings on a TV with an S (S1) terminal. S INPUT Mastering the Basics S-150 S-video Cable S(S1)-VIDEO VIDEO AUDIO AV L STV-250N Stereo Video Cable R MIC • Use the optional S-150 S-video Cable to connect the S-video terminals. Use the STV-250N Stereo Video Cable to connect the AUDIO terminals.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 35 If your TV (or VCR) has audio/video input terminals E INPUT VIDEO AV AUDIO L MIC STV-250N Stereo Video Cable R Mastering the Basics • Connect the camcorder using the STV-250N Stereo Video Cable. Connect the white plug to the white audio terminal L (left). Connect the red plug to the red audio terminal R (right). Connect the yellow plug to the yellow video terminal VIDEO.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 36 Tips for Making Better Videos Mastering the Basics E Holding the camcorder For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body. If necessary support the camcorder with your left hand. With practice, you will be able to operate the controls by touch, without taking your eye off the action.
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 37 Picture angle E Instead of zooming while recording, try to choose your picture angle before you begin. A good way to tell a story with video is to begin with a long shot that establishes the situation, and then move in with medium shots and close-ups to show the details. Remember to change your viewpoint for each shot. Long shot Medium shot Remember that any camcorder movement or change in picture angle should have a definite purpose.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 38 Searching and Reviewing While Recording E Record search When the camcorder is in record pause mode, you can use record search to play the tape forwards or backwards to find the point where you want to start or resume recording. This is useful when you want to add a new scene to a previously used cassette. By using record search, you can ensure a smooth, noise-free join between the new scene and the old one.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 39 Using the Menus Many of the camcorder’s advanced functions are selected from menus which appear in the display. E There are 2 main menus: CAM. MENU Camera menu PLAY MENU (MV500i :VCR MENU) CAM. MENU 2 CAM.MENU ( ( CAMERA SEL.SETSET MENUCLOSE CAM.SET UP VCR SET UP DISP.SET UP SYSTEM RETURN POWER CAMERA OFF PLAY(VCR) PLAY MENU SEL.SETSET MENUCLOSE VCR SET UP DISP.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 40 6. Press the selector dial in to select. • The function and its settings only appear. E 7. Turn the selector dial and move the arrow to the desired setting. • If you are setting a function other than the white balance or shutter speed, the function will be set if you skip to step 11. 8. Press the selector dial in to select. • The function is set and you return to the submenu. 9. Turn the selector dial and move the arrow to b RETURN. 10.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 41 q Camera set up submenu q w e r t y Shutter speed......................... Digital zoom ......................... Image stabilizer..................... 16:9 effect ............................. White balance ....................... Return 66 23 51 21 69 q e t SEL.SETSET MENUCLOSE SHUTTER•••••AUTO D.ZOOM••••••72× IMAGE S. ••ON 16:9••••••••OFF WHITE BAL.••AUTO RETURN E CAM.SET UP w r y w VCR set up submenu u i o !0 !1 Record mode.....................
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 42 2 PLAY MENU (MV500i :VCR MENU) Set the POWER switch to q w e r PLAY (VCR) . There are 3 submenus. To VCR set up submenu To display set up submenu To system submenu Close main menu PLAY MENU 1 3 SEL.SETSET MENUCLOSE VCR SET UP DISP.SET UP SYSTEM RETURN 2 4 Using the Full Range of Features q VCR set up submenu q w e r t y u i Record mode*....................... Output channel...................... Audio dubbing* ....................
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 43 Using the Wireless Controller The supplied wireless controller can operate the camcorder from a distance of up to 5 m (16 feet). Point it at the camcorder’s remote sensor while you press the buttons.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 44 When Operating 2 Canon DV Camcorders (Remote Sensor Mode) To prevent interference from other Canon wireless controllers being used nearby, there are 2 remote sensor modes and an off setting. The wireless controller and the camcorder have to be set to the same mode in order to be compatible. ZOOM W T REMOTE SET The wireless controller and the camcorder have been preset to mode 1.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 45 If your wireless controller isn’t working: Make sure the camcorder and the wireless controller are both set to the same mode. Check the mode the camcorder is set to by pushing any button other than the REMOTE SET button on the wireless controller. The camcorder’s mode appears in purple for about 4 seconds. Set the wireless controller’s mode accordingly by pressing the aforementioned button combinations.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 46 Setting the Date and Time E MENU Using the Full Range of Features The date and/or time display forms part of the data code. You can choose to display or hide it during playback ( 71). Set the date and time display when you first start using your camcorder. Install the backup battery before you begin ( 100). • Before you start setting the date and time, select your home time zone from the menu.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 47 E 16 1 19 18 24 20 4 2 3 17 6 7 10 9 15 8 5 21 23 14 12 22 11 13 14 15 16 17 18 19 20 21 22 23 24 No. Time zone 2 3 4 5 6 7 8 9 10 11 12 13 No. Time zone WELLGTN (Wellington) SAMOA HONOLU. (Honolulu) ANCHOR. (Anchorage) L.A. (Los Angeles) DENVER CHICAGO N.Y. (New York) CARACAS RIO (Rio de Janeiro) FERNAN. (Fernando de Noronha) AZORES Using the Full Range of Features LONDON PARIS CAIRO MOSCOW DUBAI KARACHI DACCA BANGKOK H.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 48 Setting the clock After you set the date and time, the date/time and home time zone will be displayed for about 4 seconds each time you turn the power on. CAMERA SYSTEM ( 39) D/TIME SET•• 1.JAN.2002 12:00 AM 1. Open the menu and select SYSTEM. 2. Select D/TIME SET. • The year display starts to flash. Using the Full Range of Features 3. Turn the selector dial up and down to change the year. Press the dial in to move to another part of the display.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 49 Taking Still Pictures E PHOTO PH OT O PH OT O You can record still pictures like a photograph. The camcorder records the picture and sound to tape for several seconds. The exposure is automatically adjusted. Also, starting your shooting with a still photo makes it easy to find the beginning again later with the Photo Search function ( 74).
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 50 2. Press the PHOTO button fully down to take the still picture. E • The camcorder takes the image immediately, and then records the “photo” to the tape for approximately 6 seconds. During this time the camcorder also records the sound, and the display shows the still picture. • A counter display appears, and counts up as the camcorder records the picture. F disappears from the display. • The camcorder returns to record pause mode.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 51 Turning the Image Stabilizer Off E MENU With most camcorders, even the slightest hand movements will be noticeable during telephoto recording. However, the MV500/MV500i’s image stabilizer allows you to obtain steady recordings even at high magnification. CAMERA IMAGE S. ••ON 39) To turn the image stabilizer off, open the menu and select CAM.SET UP. Then select IMAGE S. i, set it to OFF and close the menu. Using the Full Range of Features CAM.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 52 Using the Various Recording Programs E Using the Full Range of Features P The camcorder provides you with a choice of 8 recording programs. They use different combinations of camcorder settings in order to adjust the exposure and other functions to match the recording situation. • For simple point-and-shoot operation, select the Easy Recording program. Slide the program selector to the [ position.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 53 Setting the program AE mode E CAMERA 1. 2. 3. 4. Slide the program selector to Q (program AE) mode. Press the selector dial in to display the program menu. Turn the selector dial to move the arrow up or down the display. Press the selector dial in to select the desired program. • The program will appear in the display.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 54 Easy Recording The simplest way to use the camcorder is with the program selector set to the [ position. The camcorder will take care of focus, exposure and other adjustments, leaving you free to point and shoot. [ Auto Using the Full Range of Features This is the same as the Easy Recording program, except that you now have the option of using any of the camcorder’s manual functions.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 55 Sand & Snow Use this program in places where the background is so bright that the subject appears underexposed in the display — a sunny beach or ski resort, for example. You may notice some shudder when recording moving subjects. E SAND&SNOW Low Light LOW LIGHT Using the Full Range of Features This program allows you to record in dimly lit places. The shutter speed is fixed at a slow speed.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 56 Using Digital Effects Use the camcorder’s digital effects for more interesting productions. E • Faders: Start or end scenes on a tape with a fade to or from black ( 57). Fade Trigger, Vertical Wipe, Horizontal Wipe, Mosaic Fade* • Effects: Add flavour to your recordings ( 58). Art, Black and White, Sepia, Mosaic * Available in PLAY (VCR) mode only.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 57 E Faders Fade Trigger (FADE-T) When you start recording, the scene gradually fades in from a black screen. When you stop recording, it gradually fades out. Horizontal Wipe (WIPE ) When you start recording, the picture begins as a thin horizontal line in the centre of the screen which gradually expands upwards and downwards until it fills the whole screen. When you end a scene, the image is wiped from both sides of the screen.
#3_ MV500/MV500i__E(38-75) Using the Full Range of Features E 58 2/6/02 14:17 Page 58 Effects Sepia (SEPIA) Makes a monochrome image with a brownish tint. Art (ART) Adds a paintlike effect, called solarization, to the image. Mosaic (MOSAIC) Blurs the image by enlarging the size of some Black and White pixels. (BLK & WHT) Makes the image black and white.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 59 Digital effects can be set with the controls on the body of the camcorder or the wireless controller. Pressing the ▲/▼ buttons on the wireless controller correspond to turning the selector dial up and down, and pressing the SET button corresponds to pressing the selector dial in. E MENU DIGITAL EFFECTS ON/OFF SET P D.EFFECTS ON/OFF Operating faders CAMERA , PLAY (VCR) Using the Full Range of Features Sound and image fade together.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 60 6. If you’re in CAMERA mode: E Fade in- Press the start/stop button. Fade out- Press the start/stop button. If you’re in PLAY (VCR) mode: Fade in- Press the e (play) button. Fade out- Press the a (pause) button. Operating effects Using the Full Range of Features Sound records/plays back normally. When operating effects in CAMERA mode, make sure the program selector is set to Q. CAMERA , PLAY (VCR) Select effect 1.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 61 Audio Recording Selecting the audio mode The comcorder can record sound in two audio modes — 16-bit and 12-bit. The 16-bit mode produces the higher sound quality (slightly superior to CD) while the 12-bit mode records on 2 channels (stereo 1), leaving 2 channels free (stereo 2) for you to add new sound at a later date. CAMERA , MV500i PLAY (VCR) VCR SET UP ( E AUDIO MODE••12bit 39) To switch to the 16-bit mode, open the menu and select VCR SET UP.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 62 Notes: • When using an external microphone, use a microphone cable not longer than 3 meters to avoid electromagnetic inerference. • Be careful when using long microphones as they may extend into the frame. Wind screen The camcorder has an automatic wind screen to prevent wind noise from interfering with the sound track. Make sure it’s off when you want the microphone to be as sensitive as possible.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 63 Setting the Self-Timer 1 For stills DATA CODE E 2 PH OT O 2, 3 For movies POWER START /STOP PHOTO SELF TIMER MENU CAMERA OFF PLAY(VCR) This is useful when you want to include yourself in the picture when recording movies or still photographs. Using the Full Range of Features CAMERA 1. Press the self-timer button on the body of the camcorder or the SELF TIMER button on the wireless controller. • SELF-T appears in the display.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 64 • The camcorder takes the picture for approximately 6 seconds. • If you’re in CAMERA mode, the camcorder returns to record pause mode after recording. Using the Full Range of Features Notes: • To cancel the self-timer before the countdown has begun, press the SELF TIMER button. • To cancel the self-timer once the countdown has begun, press the SELF TIMER button.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 65 Ajusting AE Shift By controlling the level of the automatic exposure (AE) function, you can lighten or darken the image slightly. This allows you to compensate for backlit, overexposed scenes. E AE SHIFT P CAMERA 1. Press the selector dial in and select any recording program other than Spotlight, Sand & Snow or Night from the program menu. 2. Press the AE SHIFT button. • eAE appears light blue.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 66 Setting the Shutter Speed Set the shutter speed manually to take stable shots of quickly moving subjects. E CAMERA CAM.SET UP ( SHUTTER•••••AUTO 39) Using the Full Range of Features 1. Make sure the camcorder is set to the Q (program AE) mode. 2. Press the selector dial in and choose AUTO from the program menu. 3. Open the menu and select CAM.SET UP. 4. Select SHUTTER. 5. Press the selector dial in to select the desired shutter speed.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 67 Guidelines for shooting using high shutter speeds • When shooting with a shutter speed of 1/1000 or higher, do not shoot the sun directly.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 68 Adjusting Focus Manually E The camcorder can focus automatically. All you have to do is point it, and whatever is in the centre of the display will usually be in sharp focus. If it does not seem to be focusing well, it may be because the subject is not suitable for autofocus. You can use the manual focusing function for more control over focusing. Focus lock Using the Full Range of Features CAMERA Press the FOCUS button to turn off autofocus.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 69 Setting the White Balance The camcorder’s auto white balance system compensates for a wide range of lighting conditions. Although slight variations are unavoidable, colours will appear natural in virtually every situation.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 70 Setting the white balance manually will probably work better than auto white balance when shooting: Subjects with one dominant colour, such as sky, sea or forest Close-ups Using the Full Range of Features In rapidly changing lighting conditions 70 In places lit by certain types of fluorescent or mercury vapour lights Notes: • Turn the digital zoom off (if neccessary) to set a more accurate white balance.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 71 Displaying Date, Time and Camcorder Data (Data Code) A data code, containing the date and time the recording was made and other camcorder data (shutter speed and exposure settings) is automatically recorded on a special data section of the tape. DATA CODE E DATA CODE MENU POWER CAMERA OFF PLAY(VCR) During PLAY (VCR) mode, the data code can be displayed or hidden while the camcorder is in play, slow or still mode. Press the DATA CODE button.
#3_ MV500/MV500i__E(38-75) E 2/6/02 14:17 Page 72 Setting the data code You can also choose to display camcorder data (shutter speed and exposure settings) in cassette data codes. PLAY (VCR) DISP.SET UP ( DATA CODE•••DATE/TIME 39) To change, open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu. Possible data code combinations: Using the Full Range of Features DATA CODE D/TIME SEL.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 73 Six-second auto date The 6-second auto date appears for 6 seconds to mark the changeover of a day if the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when you start playback and have the data code turned off. The 6-second auto date will adjust for any time zone changes you have indicated. E PLAY (VCR) DISP.SET UP ( 6SEC. DATE•••OFF 39) To turn the 6-second auto date on, open the menu and select DISP.SET UP.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 74 Searching the Tape (Photo Search/Date Search) E SEARCH SELECT POWER CAMERA OFF ZERO SET MEMORY REW PLAY FF AUDIO DUB. STOP +/ –/ PLAY(VCR) PAUSE SLOW ×2 Using the Full Range of Features This allows you to move quickly through still pictures recorded anywhere on a tape (photo search) or between different days or areas of recording (date search) on a tape. PLAY (VCR) 1. Press the SEARCH SELECT button to choose between photo/date search.
#3_ MV500/MV500i__E(38-75) 2/6/02 14:17 Page 75 Returning to a Pre-Marked Position E SEARCH SELECT POWER CAMERA OFF PLAY(VCR) ZERO SET MEMORY REW PLAY FF AUDIO DUB. STOP +/ –/ PAUSE SLOW ×2 Use the wireless controller to mark a point on a tape that you want to return to following playback. CAMERA , PLAY (VCR) • The time code is replaced by a tape counter that is set to zero with the  indication. • Press the ZERO SET MEMORY button once more to cancel the zero set memory.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 76 Editing to a VCR By connecting the camcorder to a VCR, you can edit your recordings in order to remove unwanted scenes — or combine different shots to create your own video productions. E Preparations 1. Connect the camcorder to the VCR. • See “Connections for Playback on a TV Screen” on p. 32. 2. Prepare the TV and VCR. • Turn on the TV and set the TV/VIDEO selector to VIDEO. • Turn on the VCR, and set its input selector to LINE.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 77 Dubbing with Digital Video Equipment MV500 E Digital video equipment fitted with the DV terminal lets you edit, copy and transfer data digitally, with virtually no generation loss in image and sound quality. : Signal flow Side with arrow Preparations 1. Connect the camcorder and the other digital device. • Connect the Canon CV-150F DV cable (optional) with the side of the plug marked with the arrow facing as shown above. 2. Prepare the other device.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 78 MV500i E The MV500i is equipped with the DV Recording function. Digital video equipment fitted with the DV terminal lets you edit, copy and transfer data digitally, with virtually no generation loss in image and sound quality. The DV terminal is for both line-in and line-out, since a single DV cable can handle data in both directions.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 79 E Dubbing 1. Find a point on your recorded cassette slightly before the section you want to copy and set it to playback pause mode. 2. Press the REC PAUSE button on the wireless controller. • The camcorder enters record pause mode. 3. Start playback on the other digital device while you monitor the picture. 4. Press the pause button. • Recording starts. 5.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 80 Concerning copyrighting E Copyright precaution Certain pre-recorded video tapes, films and other materials, as well as some television programmes are copyrighted. Unauthorized recording of these materials may violate copyright protection laws.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 81 Recording from a VCR, TV or Analog CamcorderAnalog Line-in (MV500i only) E You can record a video played on your VCR or analog camcorder (for digital camcorders, see p. 78) or a TV program onto a tape in the MV500i, if the TV or other device has audio/video outputs.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 82 Dubbing E 1. Find a point on your recorded cassette slightly before the section you want to copy and set it to playback pause mode. 2. Press the REC PAUSE button on the wireless controller. • S-video and AV IN/OUT terminals work as input terminals. • The camcorder enters record pause mode. 3. Start playback on the other device or turn on the TV to see the desired program while you monitor the picture. 4. Press the pause button. • Recording starts. 5.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 83 Digitally Outputting Analog Video and Audio Signals — Analog-Digital Converter (MV500i only) E Connecting the camcorder to your VCR or 8 mm video camcorder allows conversion of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an output terminal.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 84 Turning the analog-digital converter on E PLAY (VCR) VCR SET UP ( AV DV OUT•••OFF 39) To turn the analog-digital converter on, open the menu and select VCR SET UP. Then select AV \ DV OUT, set it to ON and close the menu. Editing Caution: • For normal use, set AV \ DV OUT to OFF through the menu. If it is set to ON, you cannot input digital signals through the camcorder’s DV terminal.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 85 Recording Over Existing Scenes — AV Insert Editing (MV500i only) You can insert new scenes from your VCR or other camcorder onto your prerecorded tape using the MV500i’s analog line-in or DV in terminals. Original video and audio will be replaced with the new video and audio.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 86 Preparations E The tape in the MV500i: When using the MV500i’s AV insert function, only record to tapes recorded in SP mode. If there are non-recorded portions or portions recorded in LP mode on the tape, recording will stop. The playback tape: Use only tapes without non-recorded portions. If there are non-recorded portions or changes in the recording mode, you may not be able to insert AV correctly.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 87 Editing E 1. On the VCR, locate a point 3 seconds before the scene to be inserted. Set the VCR to playback pause mode. 2. On the camcorder, press PLAY and locate the recording start point. Set the camcorder to playback pause mode. • You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playback mode. 3. Press the AV INSERT button.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 88 Audio Dubbing - For MV500 (For MV500i, E 90). You can add sound to the original sound on a pre-recorded tape recorded in the SP mode with 12-bit sound. Use the internal or an external microphone. The original sound will not be erased. For best results, add sound to tapes that have been recorded with this camcorder in SP mode with 12-bit sound.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 89 Dubbing E SEARCH SELECT POWER CAMERA OFF PLAY(VCR) ZERO SET MEMORY REW PLAY FF AUDIO DUB. STOP +/ –/ PAUSE SLOW ×2 Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to dub audio. PLAY (VCR) 1. Locate the point where you want to start audio dubbing, then press the PAUSE button.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 90 - For MV500i (For MV500, 88). You can add sound to the original sound on a pre-recorded tape from audio products (AUDIO IN) or with the internal or external microphone (MIC. IN). The original sound will not be erased. For best results, add sound to tapes that have been recorded with this camcorder in SP mode with 12-bit sound.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 91 Notes: • When you add sound using the built-in microphone make sure not to connect any cables to the MIC terminal. • To use your TV to monitor video, connect the S-video terminal ( 34) or the AV terminal (use only the video plug) to your TV. You can monitor the sound with headphones only when using the S-video terminal ( 32). E Preparations Turn the camcorder’s POWER switch to PLAY (VCR) and load a recorded cassette.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 92 4. Locate the point where you want to start audio dubbing, then press the PAUSE button. E • You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playback mode. • The camcorder becomes set to playback pause mode. 5. Press the AUDIO DUB. button. • AUDIO DUB. and appear on the display. 6.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 93 Setting the Audio Mix E POWER CAMERA OFF MIX AUDIO BALANCE MONITOR ST-1 ST-2 PLAY(VCR) When you play back a tape that was recorded in 12-bit mode, you can set the audio output to play: stereo 1 (the original sound), stereo 2 (any new sound, dubbed to the tape after recording), or mix the balance between the two. • Audio from the 16-bit mode only contains stereo 1 sound and so you cannot/do not need to select the audio mix.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 94 Selecting audio output channels E When you play back a tape whose audio has been recorded on multiple channels, you can change the output channels of that sound. PLAY (VCR) VCR SET UP ( OUTPUT CH•••L/R 39) 1. Load a tape recorded with multiple-channel audio. 2. Open the menu and select VCR SET UP. Then select OUTPUT CH, set it to the desired setting and close the menu. • Refer to the following list.
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 95 Connecting to a PC Using a DV Cable By using a DV cable and connecting the camcorder to a PC equipped with a DV terminal conforming to IEEE 1394/DV compatible capture board, you can transfer images taken with the camcorder to your PC. • While connected, it is recommended that you power your camcorder from a household power socket using the power adapter. • Turn off the power of both the camcorder and the PC before connecting. • Optional software necessary.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 96 Preparing the Camcorder E Adjust the viewfinder • Set the camcorder to CAMERA mode. Extend the viewfinder straight out, then adjust the viewfinder focusing lever to suit your eyesight. • Rotate the viewfinder to an angle that allows you to view comfortably. Store the camcorder with the viewfinder flush with the body of the camcorder.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Attach the shoulder strap • For extra security and portability, attach the shoulder strap before using the camcorder. • Pass the ends through the attachment bars and adjust the length as shown.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 98 Notes on Using the Batteries E Charging and recording times • These times vary — the safest policy is always to have 2 or 3 times as many battery packs as you think you will need. • You will get more recording time if you turn the camcorder off between shots, instead of leaving it in record pause mode. Time needed for full recharge BP-508 BP-512 (optional) BP-511 (optional) BP-522 (optional) BP-535 (optional) 1 hr. 1 hr. 20 min. 1 hr. 20 min. 2 hr.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 99 How much power is left? E The indicator in the display shows you approximately how much charge the battery pack has left: ↓ ↓ Notes: • When the power is completely exhausted, “CHANGE THE BATTERY PACK” appears in the display for 4 seconds and the empty battery mark starts to flash. The power indicator light also flashes.
#5_ MV500/MV500i__E(96-121) E 2/6/02 14:19 Page 100 Installing the backup battery Open the backup battery cover on the battery attachment unit, and insert the CR2025 lithium battery with the + side facing outwards. Click the cover back into place. This backup battery allows the camcorder to remember the date and time and other settings when main power source is removed. It has a life span of about a year. When it needs replacing (or if it has not been installed), the y mark flashes in the display.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 101 Maintenance Cautions Avoid high temperatures and high humidity. • Do not leave the camcorder inside a car in hot weather, for example. • Be careful of heat radiating from video lighting equipment. • Do not take the camcorder into a humid room. E Avoid sudden changes in temperature. • If you take the camcorder from a cold place to a warm place, condensation may form on the lens and internal parts ( 104).
#5_ MV500/MV500i__E(96-121) E 2/6/02 14:19 Page 102 Storage If you do not intend to use the camcorder for some time, store it in an area which is free of dust and moisture, and where the temperature is no higher than 30°C (86°F). After storage, check each part and function of your camcorder to make sure everything is still working properly. Note: • These cautions also apply to accessories such as battery packs and cassettes. Maintenance Viewfinder • Clean the viewfinder screen.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 103 Video heads • When mosaic-like noise appears on the playback picture, the video heads may be dirty. When the video heads are badly contaminated, the camcorder may show a blank blue screen or a warning. • For the best picture possible, after using the camcorder for approximately 20 hours, clean the video heads using Canon’s DVM-CL Digital Video Head Cleaning Cassette. If the “noise” remains, repeat the cleaning (up to maximum of 5 times).
#5_ MV500/MV500i__E(96-121) E 2/6/02 14:19 Page 104 Condensation Condensation may form on the camcorder when it is moved from a cold place to a warm place. Using the camcorder while condensation is present can damage both the tape and the camcorder.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 105 Troubleshooting Refer to this checklist first if you have any problems with your camcorder. Possible explanations are given for each problem on the list — turn to the page numbers in parentheses for more information. E Make sure that the camcorder is properly connected if you are using it with a TV or VCR. Consult your dealer or service outlet if problems persist.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 ? The camcorder won’t focus. E Page 106 • The camcorder is on manual focus ( 68). • The viewfinder lens needs adjusting ( 96). • The lens is dirty ( 102). Note: • Some subjects are not suitable for autofocus. In these situations, you will often get better results using manual focus ( 68). Focus on something which is about the same distance away, lock the focus, and then point the camcorder at your original, hard-to-focus subject.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 107 ? There’s no picture on the TV screen. • AV/PHONES is not set to AV in the menu ( 32). • AV \ DV OUT (Analog-digital converter) is not set to OFF in the menu ( 83). ? There’s no picture on the TV screen, even though the tape is moving. • The video heads need cleaning ( 103). • The TV/VIDEO selector on the TV isn’t set to VIDEO ( 33-35). ? There’s no sound coming from the speaker during playback.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 108 The MV500/MV500i System Diagram (Availability differs from area to area) E WS-20 Wrist Strap WD-30.5 Wideconverter SS-800 Shoulder Strap WL-D74 Wireless Controller TL-30.5 Teleconverter MiniDV Video Cassette BP-500 Series Battery Pack CR-560 Charge Adapter/ Car Battery Cable Kit FS-30.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 109 Optional Accessories BP-500 Series Battery Packs The battery pack BP-508 is not available as an option. When you need extra battery packs, select from the following: BP-511, BP-512, BP-522 and BP-535. BP-512 BP-522 BP-535 E CR-560 Charge Adapter/Car Battery Cable Kit Connect the car battery cable to power your camcorder or recharge battery packs on the move.
#5_ MV500/MV500i__E(96-121) E 2/6/02 14:19 Page 110 VL-10Li Battery Video Light This compact yet powerful video light can be used for both indoor and outdoor shooting. • Use the BP-900 Series battery packs to power the light. Approximate usage times are as follows: BP-915 60 min. BP-930 120 min. BP-945 170 min. • Charge the BP-900 Series battery packs with the CA-910 Compact Power Adapter (optional).
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 111 Screen Displays To display the date and time, press the DATA CODE button. See also p. 71. TV SCREEN Press the wireless controller’s TV SCREEN button or turn TV SCREEN on through the menu to see the other displays on the TV screen. (The displays appear white on-screen.) They will not be added to any recordings you make with the camcorder. E DATA CODE CAMERA DISP. SET UP ( TV SCREEN•••ON 39) To turn TV SCREEN off, open the menu and select DISP.
#5_ MV500/MV500i__E(96-121) E 2/6/02 14:19 Shows how much battery power remains ( 99). Page 112 Rewind ( 28) Fast forward playback ( 29) The battery pack is exhausted ( 99). Rewind playback ( 29) Frame advance playback ( 29) No cassette is loaded, or it is set for erasure prevention ( 16, 17). Frame reverse playback ( 29) Remaining tape (Green: more than five minutes. Yellow: less than five minutes. Red: final few seconds.
#5_ MV500/MV500i__E(96-121) Zoom display ( Optical zoom 2/6/02 14:19 • Setting the AF/AE. F mark flashes white 23): W Optical plus 72× digital zoom T W Optical plus 360× digital zoom Page 113 T W E • AF/AE locked. F mark lights up green • Timer T 6sec Zoom in W Zoom out W Recording programs ( 52). T AUTO SPORTS T PORTRAIT SPOTLIGHT The image stabilizer is turned on ( 51). SAND&SNOW LOW LIGHT NIGHT CAM. MENU ( 40) CAM.MENU SEL.S MENU CAM.SET UP VCR SET UP DISP.
#5_ MV500/MV500i__E(96-121) E 2/6/02 14:19 The wind screen is turned on ( 62). WSON Page 114 Time Code 0:12:34:12 Volume level ( Speaker 31): SPEAKER – + Headphones PHONES – + SPEAKER OFF The AV/headphones terminal is switched to headphones ( 32). Audio output ( 93) This records counter information, including hour, minute, second, and frame number on a special data code area on the tape itself. It is reset automatically when a new tape is loaded.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 115 Caution phrases E The camcorder displays various caution phrases — they appear for 4 seconds before disappearing. Appears each time you turn the power on, until you set the time zone, date and time ( 46). Appears when the battery pack is exhausted ( 99). Appears when the tape has reached the end. SET THE TIME ZONE, DATE AND TIME Appears as a warning to protect the tape and also when condensation is detected.
#5_ MV500/MV500i__E(96-121) Additional Information E 116 2/6/02 14:20 Appears immediately after you start HEADS DIRTY, recording, and the USE CLEANING CASSETTE video heads are badly contaminated. Make sure to clean the video heads when this caution appears.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:20 Page 117 Specifications MV500/MV500i Power Supply (rated): 7.4 V DC Power Consumption (while recording with the AF turned on): 3.1 W (Using viewfinder), 3.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:20 Page 118 Index 16:9, 21 E Digital Effects, 56 Digital Zoom, 23 DV Dubbing, 77 Å Abroad, Using the Camcorder, 103 Accessories, 5, 109 Adapter, AC, 11-13,15 AE Programs, 52 AE Shift, 65 Analog-digital converter, 83 Analog line-in, 81 Audio Dubbing, 88 Audio Mix, 93 Audio Mode, 61 Audio Output, 93 Audio Recording and Playback, 61, 93 Audio/Video Terminal, 32 Auto, 54 Autofocus, 68 AV Insert, 85 ı Backup Battery, 100 Basic Recording, 18 Battery Charger, 14-15 Batt
#5_ MV500/MV500i__E(96-121) 2/6/02 14:20 Page 119 ˆ Storage, 102 S-video, 34 System Diagram, 108 Night, 55 Ø Optional Accessories, 109 Ê Tape Protection, 17 Telephoto, 23 Temperature, 13, 98, 100, 117 Time Code, 114 Time Zone, 46 Tips for Making Better Videos, 36 Tripod, 36 Troubleshooting, 105 TV, 32, 111 ∏ Pause, Record, 18 PC Connection, 95 Photo Search, 74 Playback, 28 Playback Connection, 32 Playback Pause, 29 Portrait, 54 Power Adapter, 11-13, 15 Powering Your Camcorder, 11 Pre-Marked Position
#5_ MV500/MV500i__E(96-121) 2/6/02 14:20 Page 120 Menu at a Glance E Use the list below to quickly navigate the camcorder’s menu. Functions are listed alphabetically. Function First make sure the camera is set to... CAMERA Additional Information Then select it from this submenu and set. 16:9 effect CAM.SET UP 6-sec. Date DISP.SET UP Audio dub* VCR SET UP Audio mode * VCR SET UP AV/headphones VCR SET UP AV → DV out* VCR SET UP Beep SYSTEM Brightness DISP.SET UP Data code DISP.
#5_ MV500/MV500i__E(96-121) Function 2/6/02 14:20 Page 121 First make sure the camera is set to... CAMERA PLAY (VCR) Then select it from this submenu and set. Shutter speed CAM.SET UP Time zone/DST SYSTEM TV screen DISP.SET UP White balance CAM.
#0_ MV500/MV500i__E_cover 2/6/02 14:14 Page 1 PUB.DIE-168 DIGITAL VIDEO CAMCORDER E Instruction Manual CANON INC. Introduction Canon Europa N.V. P.O. Box 2262, 1180 EG Amstelveen, the Netherlands Mastering the Basics Canon UK Ltd. Ribcon Way Luton Bedfordshire LU4 9UR Telephone 0870-241-2161 Canon Australia Pty. Ltd 1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia Telephone 805-2000, Fax 887-4484 Using the Full Range of Features Canon New Zealand Ltd Fred Thomas Drive, Takapuna, P.O.