Instruction Manual Digital Video Camcorder

84
E
Editing
OUTPUT
VIDEO
S(S1)-VIDEO
AUDIO
L
R
S
REC PAUSE
ON/
OFF
D.EFFECTS
REC SEARCH
(LINE-IN)
1. Connect the camcorder to the VCR.
2. Prepare the device.
• Set the TV/Video selector on the television to Video. For further details, see
“Connections for Playback on a TV Screen” on p. 27.
• Turn on the VCR. Load your recorded cassette, and put the VCR in playback
pause mode.
• See your TV and VCR instruction manuals for details.
3. Turn the camera’s POWER dial to VCR and load a blank cassette.
Example recording from a VCR
Preparations
S-150 S-video Cable
STV-250N Stereo Video Cable
: Signal flow
• Attach the DU-300 Docking Unit in order to use the S-video terminal ( 27).
Recording from a VCR, TV or Analog Camcorder-
Analog Line-in (MV4i and MV4i MC only)
You can record a video played on your VCR or analog camcorder (for digital
camcorders, see p. 82) or a TV program onto a tape in the MV4i/MV4i MC, if the
TV or other device has audio/video outputs.
• If an anomalous signal is sent from the TV or VCR, the images recorded on the
tape may also be anomalous (although it may not appear so on the TV image),
not recorded at all, or COPYRIGHT PROTECTED DUBBING RESTRICTED
may appear in the display.
• You are unable to dub tapes recorded with the copyright protective signal.
#4_MV4/MV4 MC-i_E(80-97) 01/7/31 10:32 Page 84 (1,1)