Instruction Manual Digital Video Camcorder

110
E
Using a Memory Card
(MV4i MC only)
1. During/after recoding a still image, press the CARD – button to
open the CARD PHOTO REVIEW menu.
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a still image, the menu appears
immediately.
• PROTECT , IMAGE ERASE settings appear.
• If you select |RETURN, the still image disappears.
2. Select PROTECT and press the SELECT dial in.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the SELECT dial again to cancel it.
• If you select |RETURN, the still image disappears.
2. Select IMAGE ERASE and press the SELECT dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the SELECT dial in.
• The image is erased.
To erase an image
To protect an image
CARD PHOTO REVIEW
●
Erasing still images
Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection first in order to
erase an image.
• Erase images with caution. Once an image has been erased, it cannot be restored.
There are 3 ways to erase a single image.
To erase images one at a time
1. ➡ CARD PHOTO REVIEW menu ( 110)
2. ➡ File Operation menu ( 111)
To erase images one at a time or erase all images on the memory card at once
3. ➡ Card Operations submenu ( 115)
: When playing back an image in CARD PLAY mode
: When displaying an index screen in CARD PLAY mode
INDEX
SINGLE
SINGLE
CARD
PLAY
SINGLE
CARD
PLAY
CARD
REC
CARD
REC
#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 110 (1,1)