Printer/Fax/Scanner/Copier User's Guide MultiPASSTM C50

Canon MultiPASS C50 Hardware Manual ENGLISH
8-25Chapter 8 Troubleshooting
Problem Possible cause Solution
Output is faint You may be using Draft print
quality or Fine mode.
Try using Standard mode. See the
MultiPASS Desktop Manager
User’s Guide.
Printing takes too much time You may be using Fine mode. Try using Standard mode. See the
MultiPASS Desktop Manager
User’s Guide.
The printout contains blurred
or smudged ink
The medium you are using
may not be supported by the
MultiPASS C50.
Use only print media specified in
”Selecting the Print Media” on
page 2-37.
You may be printing on the
wrong side of the paper.
Many types of paper have a
”correct” side for printing. If
your paper does, make sure that
side is facing up. If the paper has
no obvious correct side, try
turning the paper over and
printing on the other side.