MultiPASS MP730 Quick Reference Guide

11-4 Machine settings Chapter 11
3. ACTIVITY REPORT Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions.
AUTO PRINT ON
AUTO PRINT OFF
UG
3. TX SETTINGS — —
1. ECM TX Enables/disables Error Correction Mode (ECM) during
sending.
ON
OFF
2. MID PAUSE SET Selects the pause length when you press [Redial/Pause]. 2 SEC (1 to 15)
3. AUTO REDIAL Enables/disables automatic redialing. ON
OFF
UG
1. REDIAL TIMES If you select <ON>, selects the number of redialings. 2 TIMES
(1 to 10)
2. REDIAL
INTERVAL
If you select <ON>, selects the length of time between
redialings.
2 MIN. (2 to 99)
4. TIME OUT Enables/disables automatic scanning without having to
press [Start] after using speed dialing or redialing to
send a document.
ON
OFF
5. TX START SPEED Selects the speed at which the machine starts
transmitting.
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
6. COLOR DIRECT TX Enables/disables sending of color documents to fax
machines that do not have color faxing capability.
OFF
ON
4. RX SETTINGS — —
1. ECM RX Enables/disables Error Correction Mode (ECM) during
reception.
ON
OFF
2. FAX/TEL AUTO SW If you select <FAX/TEL AUTO SW> as the receive mode,
customizes its settings.
—UG
1. RING START TIME Selects the time the machine takes to check whether a
call is a fax or voice call.
8 SEC (0 to 30)
2. F/T RING TIME Selects the ring length for voice calls. 15 SEC
(10 to 45)
3. DEFAULT
ACTION
Selects whether the machine switches to receive mode
after the ring time has elapsed, or whether it
disconnects the call.
RECEIVE
DISCONNECT
3. DRPD:SELECT FAX If you select <DRPD> as the receive mode, select the
ring pattern for the machine.
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
4. INCOMING RING If you select <FAX/TEL AUTO SW>, <DRPD>, or <FAX
ONLY MODE> as the receive mode, enables/disables
ringing for fax calls. (A telephone must be connected to
your machine for ringing to occur.)
OFF
ON
Name Description Setting Details