User Guide
67
Chapter
3
Scanning
X Scanning with the operation panel
By pressing the [Black Start] or [Color Start] key on the machine, you can scan documents to your
computer.
Pressing the [Black Start] key has the same effect as clicking the [Save-1] button in the MP
Toolbox. Pressing the [Color Start] key has the same effect as clicking the [Save-2] button in the
MP Toolbox. You can change the settings for the [Save-1] or [Save-2] button, or you can set up the
[Black Start] or [Color Start] key to perform the same operation as other buttons. J “Setting the
scanning method for the [Black Start] or [Color Start] key”
IMPORTANTIMPORTANTIMPORTANT
• After turning the machine ON, or after recovering from Power Save mode, the image may not be
correctly read by the machine. Wait at least one minute before scanning.
• While the machine is scanning images to the computer, or the computer is in the sleep mode or standby
mode, do not disconnect and connect the USB cable.
1 Place the document face-down on the platen glass.
2 Press the [Scan] key.
The machine switches to scan mode.
3 Press the [Black Start] key for black-and-white scanning, or the [Color Start] key for
color scanning.
The document will be scanned.
NOTE
• Although the MP Toolbox and the MP Toolbox settings dialog box open when the [Black Start] or [Color
Start] key is pressed, the document will be scanned without clicking [Start] in the MP Toolbox.
• The scanned document will be saved in the following location depending on your computer environment.
– If the [My Documents] folder contains the [My Pictures] folder, a folder with the scanning date will be
created in the [My Pictures] folder, and your document will be saved in this folder.
– If there is no [My Pictures] folder, a folder with the scanning date will be created in the [My Documents]
folder, and your document will be saved in this folder.
FWsoft-E.book Page 67 Friday, October 17, 2003 2:01 PM