MultiPASS F80 Comprehensive Guide

9-2 Receiving faxes Chapter 9
Receiving both faxes and voice calls
automatically: FAX/TEL AUTO SW
Choose this mode if:
•you only have one telephone line for both fax and telephone use.
•you want to receive faxes automatically as well as voice calls.
You will need to:
set <FAX/TEL AUTO SW> ( p. 9-1).
•connect a telephone to your machine ( Setup Sheet).
When you receive a fax call: The machine will receive the fax automatically.
When you receive a voice call: The machine will ring. Pick up the handset to answer the
call.
Customizing FAX/TEL AUTO SW
You can customize this mode to control precisely how your machine handles incoming calls.
You can adjust the time the machine takes to check whether a call is a fax or voice call, the
length of time the machine rings when it is a voice call, and the action the machine must take
if no one answers a voice call.
Follow this procedure to customize <FAX/TEL AUTO SW>:
1 Make sure you have set <FAX/TEL AUTO SW> ( p. 9-1).
2 Press [Menu].
3 Use [2] or [3] to select <USER DATA>.
4 Press [Set].
5 Use [2] or [3] to select <FAX SETTINGS>.
6 Press [Set].
7 Use [2] or [3] to select <RX SETTINGS>.
8 Press [Set].
9 Use [2] or [3] to select <FAX/TEL AUTO SW>.
RX SETTINGS
1.ECM RX
FAX SETTINGS
1.USER SETTINGS
USER DATA
1.TEL REGISTRATION