User`s manual

F50 User’s Manual

Press to enter fax mode.

Load document in ADF

Insert the document face up in the ADF tray.

Select phone number

Press the one-touch speed dial button that corresponds to the desired

number. The fax will automatically be scanned and sent.

Coded Speed Dialing

You can enter an additional 100 numbers for quick retrieval using a two-step

procedure.

As with one-touch speed dial, the coded speed dial numbers must be entered

before they can be used. You can print a list of numbers entered for Coded

Speed Dialing at any time. For procedures, see “Printing Reports on Demand”

on page 18.

To enter a Coded Speed Dial number:

Access CODED SPEED DIAL

Press to enter fax mode.

Press then until

TTEELL RREEGGIISSTTRRAATTIIOONN

appears.

Press to access.

Press until

CCOODDEEDD SSPPEEEEDD DDIIAALL

appears. Press to access.

Select code (00-99)

Press to scroll through the codes.

If a speed dial code is already set up, the number will appear. If a group is

registered for that code (see Group Dialing on page 31), the message GROUP

DIAL appears.

Scroll to an unused code and press twice.

Set

Fax

F50 Chapter 4.qxd 06/01/2001 4:08 PM Page 26