MultiPASS F20 Software User's Guide

Chapter 4 Scanning 64
If you wish to delete the frame, right-click the frame and then click
Delete.
9. Click Scan.
Scanning of multiple photos will begin.
10. Depending on which operation was selected in 3, continue with the
procedures that follow.
You may not be able to crop when the resolution is low. If you cannot
crop properly, increase the resolution and try cropping again.
Viewing the Scanner Driver 0
When scanning with the MultiPASS Toolbar (also referred to as the
Toolbar), you can set the scanner driver to always appear before scanning
is performed.
To view the scanner driver:
1. On the Windows desktop, on the Toolbar, click Settings.
2. Click Show scanner driver before scanning, in the Toolbar Settings
tab.
If the Show scanner driver before scanning option is cleared, the image is
scanned based on the scan settings defined in the Toolbar settings.