User Guide

ManualsBrandsCanon ManualsOtherMultiPASS C635, C3500, C5500

181

182

183

184

185

186

187

188

189

190

4-1

Part 1: Facsimile

MultiPASS C3500/C5500 Chapter 4: Appendix

1. INSTALLATION

This machine has been designed for user installation. Therefore, this manual

contains only an outline description of the procedures. For details of the

installation, see the

USER'S GUIDE

1.1 Setting up

•Choosing a Location for Your MultiPASS

•Do you have everything?

Check that nothing is missing when the unit is unpacked.

•Removing shipping materials

Peel off all strips of tape from the unit. Don't forget to remove the protective sheet from the

separation roller, in the scanner section.

•Assembling your MultiPASS

Install the accessories, Sending Document support, Document support for scanned

documents, Output tray extension, etc.

•Making connections

Connect the Telephone line, Extension phone or Answering machine, Parallel cable (for

PC).

•Powering up

Connect the power cord and check that power is supplied.

•Installing the BJ cartridge

Unseal the BJ cartridge, and load it into the machine. The instructions for this operation

are written on the printer cover.

•Loading paper

Set paper in the auto sheet feeder, in SELECT PAPER SIZE under FAX PRINTER SETUP,

set the size of paper that is to be used.

•Setting the TEL LINE TYPE

Choose the setting the matched the type of line being used.

•Entering user information

Enter user information, such as DATE & TIME, UNIT TELEPHONE #, UNIT NAME.etc.

1.2 Checking Operations

•Copy operation

Make a copy, and check that the operation is normal.

•Communication test

Transmit to, and receive from other facsimiles, and check that images are sent normally for

transmission, and are printed normally for reception.

What to do when trouble occurs

Very rarely, during use, the display may go out, all the buttons may stop

working, or some other trouble may occur because of strong electrical noise

or a large amount of static. If such trouble occurs, initialize the RAM.

During installation, we recommend that you perform the all clear operation

after the power on. Refer to

NOTE: "All clear" when nothing works on Page 1-

REFERENCE