User Guide

3-3
Part 1: Facsimile
MultiPASS C3500/C5500 Chapter 3: Maintenance & Service
1.6 General Tools
Tool Use
Phillips screwdriver Removing/inserting screws
Flat bladed screwdriver Removing/inserting screws
Precision Phillips screwdriver Removing/inserting screws
Precision flat bladed screwdriver Removing plastic tabs
Tweezers Removing coil spring
Isopropyl alcohol (IPA) Cleaning the cleaning location
Pliers, needle nose Driving retaining ring
1.7 Special Tools
Tool Use Part No.
Grease (FLOIL G311S) Apply to specified parts TKC-0953
Grease (EM-50L) Apply to specified parts HY9-0007
Grease (IF-20) Apply to specified parts CK-8006
Grease (PG-641) Apply to specified parts CK-0562
Gap gauge (1.2mm) For head gap adjustment QY9-0016
BJ cartridge (BC-20/BC-21) For head gap adjustment ———
Cover opener For opening the upper cover HY9-0021
Cover opener
The Cover opener (round-tip screwdriver) has been set as a special tool, but
any precision screwdriver with a tip diameter of 1.5 mm or less would do
instead. If using a substitute, be careful not to scratch any surfaces. See
page 1-46.
NOTE