User manual for the MultiPASS C555.

5-6 Paper Handling Chapter 5
Setting the Paper Thickness Lever
The paper thickness lever adjusts the gap between the print head and the print media
to suit the print media’s thickness. Before printing, be sure to set the paper thickness
lever.
For details on which position to set the paper thickness lever for the print media you
are using, (1p. 5-2).
n
If the paper thickness lever is not set correctly before printing, smudging and poor print
quality may result.
Follow this procedure to set the paper thickness lever:
1 Open the document tray.
2 Lift the document guides to open the
ADF (Automatic Document Feeder).
• If the ADF (Automatic Document Feeder)
does not open easily, slide the document
guides outward and then open the printer
cover.
3 Press C.
c
• Do not try to manually move or stop
the cartridge holder since this may
damage the unit.
• Do not touch the components
shown or any metal parts since this
may adversely affect operation of
the unit and/or affect print quality.
RIBBON CABLE
ROUND SHAFT
GUIDE RAIL
DOCUMENT GUIDES