User manual for the MultiPASS C555.

12-18 Maintenance Chapter 12

Transporting the MultiPASS

Whenever you plan to transport the MultiPASS, you need to prepare it so it will not be

damaged during the move.

Follow this procedure to prepare and pack your MultiPASS and its components:

1 Disconnect the power cord.

2 DO NOT remove the BJ cartridge from the MultiPASS. With the cartridge

holder in its home position on the right side of the unit, tape the BJ cartridge

and cartridge holder to the side of the unit.

3 Disconnect the extension phone, answering machine, or data modem from

the MultiPASS (if connected). (2 p. 2-6)

4 Disconnect the telephone line. (2 p. 2-6)

5 Disconnect the parallel cable or USB cable from the MultiPASS. (2 p. 2-7)

6 Remove the document support. (2 p. 2-5)

7 Make sure the document tray is closed. (You do not need to remove this tray.)

8 Replace all tapes and shipping materials you removed when you first

unpacked the MultiPASS. (2 p. 2-4)

9 Pack the MultiPASS and all its components in the original shipping carton.

(2 p. 2-3)

• Do not remove the BJ cartridge from the MultiPASS or ship a BJ cartridge or tank from

which you have removed the protective cap and tape. An opened BJ cartridge or BJ tank

that is not installed in the MultiPASS or in the BJ cartridge container may leak, and the

print head may dry out. Also, if you do not tape the BJ cartridge to the side of the

MultiPASS, ink may spill into the unit.

• If you no longer have the shipping carton your MultiPASS came in, pack the unit in a

suitably sized, sturdy cardboard box, and use bubble wrap or other suitable packing

materials. (If you use foam peanuts, be sure to wrap the MultiPASS in plastic first to

prevent the packing materials from entering any openings on the unit.)