Technical information
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Printing With the MultiPASS C5500
- Chapter 3 Using the MultiPASS Desktop Manager
- Chapter 4 Sending Faxes With the MultiPASS C5500
- Chapter 5 Receiving Faxes
- Chapter 6 Scanning With the MultiPASS C5500
- Chapter 7 Working With Documents in The Desktop Manager
- Managing Your Documents in the Desktop Manager
- Selecting Documents in the Desktop Manager
- Printing a Document in the Desktop Manager
- Creating a Folder
- Moving a Document
- Copying a Document
- Renaming a Document or Folder
- Deleting a Document or Folder
- Restoring a Deleted Document
- Emptying the Trash Folder
- Importing a Document
- Exporting a Document
- Attaching a Document to Electronic Mail (E-Mail)
- Manipulating a Document in Document View
- Merging a Document
- Indexing a Searching for Documents
- Modifying a Document
- Printing the Document
- Adjusting the MultiPASS Viewer Default Options
- Managing Your Documents in the Desktop Manager
- Chapter 8 Setup and Other Utilities in the Desktop Manager
- Chapter 9 Maintaining the MultiPASS C5500
- Chapter 10 Troubleshooting
- Appendix A Specifications
- Appendix B Using the MultiPASS C5500 as a Stand-alone Fax
- Glossary
- Index
![](/manual/canon/multipass-c5500/technical-information-english/images/img-56.png)
Chapter 2 Printing With the MultiPASS C5500 2-21
Printing
❍ Align the edge of the paper with the right edge of the
sheet feeder.
❍ Secure the stack with the paper guide.
❍ Start your print operation.
Auto Feed Guidelines
When automatically feeding stacks of paper, follow these guidelines:
❍ Do not leave paper stacked in the printer for long periods of time;
longer sheets of paper may become bent or curled over time. This
may cause the paper to misfeed or jam.
❍ If your printed page contains lots of graphics, the ink on the page
may be damp due to the print density. Remove the page right away
and allow the ink to dry.
❍ The capacity of the paper output tray is 30 sheets of paper. To
reduce paper jams,remove paper from the output tray before the
count reaches 30.
❍ If paper curls after printing, remove it immediately; otherwise, paper
jams may occur.
Slide the stack
of paper into
the sheet feeder
until it stops.