User guide for the MPC3000.

9-16 Maintaining the MultiPASS C3000 Chapter 9
❍ If you are replacing both tanks, repeat steps 3 through 6
for the other BJ tank.
❍ Make sure each tank is properly seated in its slot.
The cartridge holder then moves to the
home position on the right side of
the unit.
N
Before you unplug the MultiPASS C3000, make sure the BJ cartridge
is in the home position on the right side. If you unplug the unit while
it is printing, or move the BJ cartridge from the home position, the
cartridge will not be capped and may dry out.
Close the printer
cover, and press
the CARTRIDGE
7
Ink
Cartridge
BCl-21
Color
Made in
Japan
Ink
Cartridge
BCl-21
Black
Made in
Japan
Press firmly on the
tab on top of the
new BJ tank until
it snaps
into place.
6
Ink
Cartridge
BCl-21
Black
Made in
Japan
Ink
Cartridge
BCl-21
Color
Made in
Japan
Ink
Cartridge
BCl-21
Color
Made in
Japan
Ink
Cartridge
BCl-21
Black
Made in
Japan
Slide the new
BJ tank into
the empty slot.
5
MPC-3000—USERS MANUAL/V000/07-97
TANK_IN
TANK_BACK