User Guide

1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement
Consumables by Service Engineer
(1) Adjustment
Note: DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they are not re-
adjustable.
The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
*1: Only for CD / DVD printing supported regions.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no
p
arts in this machine that re
q
uire
p
eriodic re
p
lacement b
y
a service en
g
ineer.
Adjustment Timing Purpose Tool
Approx.
time
EEPROM
initialization
At logic board ass'y
replacement
To initialize settings. None.
Perform in the
service mode.
1 min.
LCD language
settings
At logic board replacement To set the language to be displayed
on the LCD.
None.
Perform in the
user mode.
1 min.
Destination settings
(EEPROM settings)
At logic board ass'y
replacement
To set the destination. None.
Perform in the
service mode.
1 min.
Waste ink counter
resetting
(EEPROM settings)
- At logic board replacement
- At waste ink absorber
replacement
To reset the waste ink counter. None.
Perform in the
service mode.
1 min.
Waste ink amount
setting
(EEPROM settings)
- At logic board replacement
- At waste ink absorber
replacement
To set the waste ink amount to the
waste ink counter.
None.
Perform in the
service mode.
1 min.
Paper feed motor
position adjustment
At paper feed motor
replacement
To adjust the belt tension. (Position
the paper feed motor so that the belt
is stretched tight.)
None. 2 min.
CD / DVD detection
sensor light volume
correction
*1
- At logic board replacement
- At carriage unit replacement
To correct the light volume for the
CD / DVD detection sensor.
None.
Perform in the
service mode.
2 min.
Grease application - At carriage unit replacement
- At PR shaft ass'y
replacement
- At CL base or CL gear
replacement
- To maintain sliding properties of
the carriage shaft and the lift cam
shaft.
- To protect the machine's sliding
portions (gears).
FLOIL KG-107A 1 min.
New Ink system function
check
- At logic board replacement
- At platen unit replacement
- At carriage unit replacement
To maintain detection functionality
for presence of the ink tanks and
each ink tank position.
None.
Perform in the
service mode.
1 min.
FAU sponge sheet
adjustment
- At FAU sponge sheet
replacement
- At FAU sponge frame
replacement
- At scanning unit replacement
To attach the FAU sponge sheet in
the proper position.
None. 2 min.
1-1