Printer User Manual

❍ Grasp both sides and lift it up.
C
Do not try to move the cartridge holder manually; this may damage the
unit. If the cartridge holder does not move and the unit beeps several
times, unplug the MultiPASS and let it cool for several minutes. (The
device has an automatic protection mode that prevents it from
overheating.) After allowing it to cool, plug the unit in again and press
the
CARTRIDGE
button to move the cartridge holder to the center of
the unit.
Hold the BJ cartridge on the sides only. Do not touch the silver plate on
the bottom of the BJ cartridge or the silver metal or circuit area on the
side. The metal area may become hot during printing.
Open the
printer cover.
2
7-12 Maintaining the MultiPASS C635 Chapter 7
MPC-635—USERS MANUAL/V000/06-99
DO NOT TOUCH THE
RIBBON CABLE
DO NOT TOUCH THE
GUIDE RAIL
DO NOT TOUCH THE
ROUND SHAFT
COVER_OPEN(A)