User`s guide

MP730/MP700
Software Guide (Scanning)
39
With the WIA driver dialog box open, follow the steps below.
→ “Scanning with the WIA driver (Windows XP only)”
1 Click [Adjust the quality of the scanned picture].
2 In the [Advanced Properties] dialog box, adjust the scan settings.
¡¡
¡¡
In [Picture type], select the type of scan you want for your document.
¡¡
¡¡
Use the slider to adjust the brightness. Move the slider to the left to make the image darker, or to
the right to make it brighter. You can also enter a value.
¡¡
¡¡
For a color or grayscale image, use the slider to adjust the contrast. Move the slider to the left to
decrease the contrast, or to the right to increase it. You can also enter a value.
¡¡
¡¡
Enter a resolution between 50 and 600 dpi.
→ “Determining resolution”
¡¡
¡¡
To revert to the original settings, click [Reset].
3 Click [OK] to activate the scan settings you specified and to close the [Advanced Properties] dialog
box.
Click [Cancel] to cancel the scan settings you specified and close the [Advanced Properties] dialog
box.
→ “Scanning with the WIA driver (Windows XP only)”
3
Scanning documents Setting up the WIA driver (Windows XP only)
Setting preferences in the WIA driver