Printer User's Manual MP 1000

Chapter 6 Using Automatic Dialing 6-13
After scanning the document into memory, the MultiPASS 1000
automatically dials each number in the group. It dials the numbers
in the order that you registered them.
❏ If there is no group registered under the one-touch speed
dialing button or two-digit code, the LCD displays the NO TEL #
message. Make sure you entered the correct number and that
the group whose numbers you want to dial has been registered
correctly for group dialing.
❏ If you make a mistake when dialing, press STOP. Then try
again.
Changing a Group Dialing Number
Use these steps when you need to make group dialing changes to:
❏ Add or delete numbers in a group
❏ Change the name of the group
❏ Cancel group dialing for a specific one-touch button or coded
dial code
1. Follow the same steps that you would use to register the group
dialing numbers and names.
❏ See steps 1-5 starting on page 6-10.
2. Press the arrow buttons to display the one-touch or coded
speed dialing number that contains the group you want to
change.
3. Press START/COPY.
❏ The MultiPASS 1000 displays the first speed dialing
number in the group.
4. If you want to add one-touch or coded speed dialing numbers
to the group, enter them now.
❏ Follow the instructions starting with step 8 on page 6-11.
TEL= 2226663000
F16 JONES & ASSOC.
GROUP DIAL
F08=GROUP DIAL
< >
Using Automatic
Dialing