Operation Manual

● If you set to <On>, the setting will become effective with ne

xt replacement of toner cartridges.

● Immediately after cartridge replacement, a certain amount of time is required for toner to be evenly

distributed inside the cartridge.

ou can congure a setting to prevent stains from being scanned when they are detected in the document feed

scanning area. Selecting <On> removes streaks generated by the edge of the original.

<Off>

<On>

<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Remove Streaks from Scan

ea>

Select <Off> or <On>

● When str

eaks are removed, areas with stains are not scanned. Clean the original scanning area so that the

original is scanned satisfactorily.

Setting Menu List

481