Operation Manual

Printing Results Are Not Satisfactory
1W2X-0AA
Dirt inside the machine may affect printing r
esults. Perform care and cleaning to the machine rst.
Regular
Cleaning
(P. 580)
Smudge Marks Appear on the Edge of Printouts
Are you using appropriate paper?
● Check
the supported paper types and replace with an appropriate type. Also, set the paper size and type
correctly.
Available Paper(P. 705)
Loading Paper(P. 140)
Specifying Paper Size and Type(P. 159)
Do you print data without margins?
● This
symptom occurs if a margin is set to none in the printer driver. A margin of 5 mm or less around the
edge of paper or 10 mm or less around the edge of envelopes is not printable with the machine. Make
sure to have margins around the document to print.
[Finishing] tab
[Advanced Settings] [Expand Print Region and Print] [Off]
Do smudges appear on printouts when you perform continuous printing?
(MF735Cx / MF734Cdw / MF732Cdw)
● This
phenomenon may occur when you continuously print jobs containing many images with halftones
*
.
Change the setting of <Regularly Clean Fix. Assembly>. The higher level you specify, the higher frequency
of regular cleaning is performed.
<Regularly Clean Fix. Assembly>(P. 474)
*
Halftones used for table cells, gr
aphs, presentation materials backgrounds, photographs, etc.
● If a higher le
vel is specied, the printing speed will be slower.
● If the symptom does not improve after changing the setting of <Regularly Clean Fix. Assembly>, perform
<Clean Fixing Assembly (Reduce Paper Back Side Stain)>.
Cleaning the Fixing Assembly(P. 586)
Troubleshooting
632