Operation Manual

Connecting Directly (Access Point Mode)
1W2X-06A
Even in an envir
onment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without dicult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 325)
Connecting Directly(P. 326)
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order.
Check the network settings of the machine.
● Set the IPv4 addr
ess.
Setting IPv4 Address(P. 32)
Preparing the mobile device
● Congur
e settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
● <Menu> <Preferences> <Network> <Direct Connection Settings> set
<Use Dir
ect Connection> to <On>.
Specifying the value for time until auto termination
● Y
ou can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Direct Connection Termination>(P. 453)
Connecting multiple mobile de
vices at the same time
● Congure the machine's SSID and network key arbitrarily.
<Access Point Mode Settings>(P. 453)
Linking with Mobile Devices
325