Operation Manual

Setting Up Connection by Selecting a Wireless Router

1W2X-00E

ou can search the wireless routers (or access points) available for connection and select one from the display of the

machine. For the network key, enter a WEP key or PSK. Before selecting a wireless router, check and write down the

required setup information, including the SSID and network key (

Checking the SSID and Network Key(P. 30) ).

Security settings

● If the wir

eless connection is set up by selecting a wireless router, the WEP authentication method is set to

<Open System> or the WPA/WPA2 encryption method is set to <Auto> (AES-CCMP or TKIP). If you want to

select <Shared Key> for WEP authentication or <AES-CCMP> for WPA/WPA2 encryption, you need to set up

the connection using <Enter Manually>.

Setting Up Connection by Specifying Detailed Settings(P. 27)

Select <Menu> in the Home screen. Home Screen(P. 123)

Select <Preferences>

<Network>.

● If the login scr

een appears, enter the correct ID and PIN.

Logging in to the Machine(P. 134)

Select <Wireless LAN Settings>.

● If the <Do you want to enable the wir

eless LAN?> message is displayed, select <Yes>.

Read the message that is displayed, and select <OK>.

Select <SSID Settings>.

Select <Select Access Point>.

➠ The machine starts sear

ching for available wireless routers.

● If

a message is displayed telling that access point cannot be found, see

Countermeasures for Each

Message

(P. 649) .

Select a wireless LAN router.

● Select the r

outer whose SSID matches the one that you have written down, and select <Next>.

Setting Up