Operation Manual

1.0
1.4
1.8
2.2
Image
1.0
1.4
1.8
2.2
This setting is enabled only when <Gamma> is selected in <CMS (Matching)/Gamma>.
Advanced Smoothing
Select how jagged outlines of text and graphics are smoothed. <Smooth 2> applies a stronger smoothing effect than <Smooth 1>.
You can apply the setting separately for text and graphics.
Advanced Smoothing
Off
Smooth 1
Smooth 2
Apply to Graphics
Off
On
Apply to Text
Off
On
BarDIMM
This setting enables you to print bar codes supported by the Barcode Printing Kit. If <Enable> is selected, the machine will generate
bar codes when it receives bar code commands from the host computer. If <Disable> is selected, bar codes will not be generated,
even if bar code commands are sent from the host computer.
Enable
Disable
To enable the BarDIMM menu, it is necessary to activate the Barcode Printing Kit. When you are not printing bar codes,
make sure to disable the BarDIMM menu. Otherwise, the processing speed of regular print jobs may be reduced.
The default setting is <Disable>. If you activate the Barcode Printing Kit, it changes to <Enable>.
<Menu> <Printer Settings> <PCL> <Gamma Correction> Select <Text>, <Graphics>, or <Image>
Set the gamma value
<Menu> <Printer Settings> <PCL> <Advanced Smoothing> Specify the smoothing setting
*3
㻡㻢㻟㻌㻛㻌㻣㻟㻡