Operation Manual

Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Disabling both SNMPv1 and SNMPv3
If both versions of SNMP are disabled, some of the functions of the machine become unavailable, such as obtaining machine
information via the printer driver.
Using the operation panel
You can enable or disable the SNMP settings from <Menu>. SNMP Settings
Enabling Both SNMPv1 and SNMPv3
If both versions of SNMP are enabled, it is recommended that MIB access permission in SNMPv1 be set to [Read Only]. MIB
access permission can be set independently in SNMPv1 and SNMPv3 (and for each user in SNMPv3). Selecting [Read/Write]
(full access permission) in SNMPv1 negates the robust security features that characterize SNMPv3 because most of the
machine settings can then be controlled with SNMPv1.
LINKS
Enabling SSL Encrypted Communication for the Remote UI
9
㻠㻜㻡㻌㻛㻌㻣㻟㻡