Operation Manual

0SCJ-0H9

Configuring the Settings for Direct Connection (Access Point Mode)

Connect a mobile device to the machine wirelessly and directly without routing through a wireless LAN router (or access point). For how

to print with Direct Connection, see

Making a Simple Wireless Connection Using Direct Connection (Access Point

Mode) (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw).

Setting <Enable Direct Connection> to <On> prevents use of a wired LAN or any wireless LAN other than Direct Connection.

While in Direct Connection, sleep mode is not as effective at saving power.

When both <Enable Direct Connection> and <Enable NFC> are set to <On>, sleep mode is not as effective at saving power

even if not in Direct Connection.

Enable NFC

Tap <Menu> in the <Home> Screen.

Tap <Network Settings>.

If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the

Machine

Tap <Enable Direct Connection>.

Tap <On>.

Restart the machine.

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

㻟㻡㻡㻌㻛㻌㻣㻟㻡