Operation Manual

0SCJ-075

Setting Up Connection Using WPS Push Button Mode

If your wireless router supports WPS push button mode, you can easily set up a connection with a WPS button.

How to operate the wireless router may vary on each device. See the instruction manuals for your networking device for help.

Tap <Menu> in the <Home> Screen.

Tap <Network Settings>.

If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the

Machine

Tap <Wireless LAN Settings>.

If the <Do you want to enable the wireless LAN?> message is displayed, tap <Yes>.

Read the message that is displayed, and tap <OK>.

Tap <WPS Push Button Mode>.

Tap <Yes>.

A PIN code is generated.

Press and hold the WPS button on the wireless router.

The button must be pressed within 2 minutes after tapping <Yes> in step 6.

Depending on the networking device, you may need to press and hold the button for 2 seconds or longer. See the instruction

manuals for your networking device for help.

If an error message is displayed during setup

Tap <Close> and return to step 5.

Check that the Wi-Fi indicator is blinking on the operation panel.

The Wi-Fi indicator blinks when a wireless router is detected.

㻟㻟㻟㻌㻛㻌㻣㻟㻡