Operation Manual

Seven Levels

Data Size

Small: Memory Priority

Standard

Large: Image Quality Priority

Initialize Default Settings

You can change and register the settings used when documents are saved to a shared folder or FTP server.

Register the sender name for e-mails and I-Faxes. The registered name is displayed in e-mails, along with the e-mail address. If the

sender name is not registered, only the e-mail address is displayed.

Specify settings for the gamma value and file compression ratio for converting scanned documents into files.

YCbCr TX Gamma Value

Select the gamma value used when converting scanned color documents into the specified file format. You can specify the same

gamma value as that of the monitor which is to be used for viewing the converted files. The files are displayed with brightness that

is true to the original documents.

Setting Gamma Values

Gamma 1.0

Gamma 1.4

Gamma 1.8

Gamma 2.2

PDF (Compact) Image Quality Level

Adjust the balance between data size and image quality to suit the type of document you are scanning when converting scanned

documents into PDF (Compact) files. <Data Size Priority> makes the compression ratio higher than normal to create smaller files with

lower image quality. On the other hand, <Image Quality Priority> makes the compression ratio lower than normal to create larger

files with higher image quality.

Selecting a File Format

Image Level in Text/Photo Mode or Photo Mode

Data Size Priority

Normal

Image Quality Priority

Image Level in Text Mode

Data Size Priority

Normal

Image Quality Priority

<Menu> <Scan Settings> <Register Unit Name (E-Mail/I-Fax)> Enter the sender name <Apply>

Output File Image Settings

㻡㻟㻥㻌㻛㻌㻣㻟㻡