Operation Manual

0SCJ-08C

Configuring the Machine for Scanning to FTP Server

Before configuring the machine for scanning to FTP Server, check the setup flow shown below.

Make sure that the machine and the computer are correctly connected.

Connecting to a Wireless LAN (MF729Cx / MF728Cdw / MF724Cdw / MF628Cw)

Connecting to a Wired LAN

Make sure that you have the following information:

The IP address of the machine. Viewing Network Settings

FTP server name.

Path to the FTP server and folder name.

User name, password (only if set).

If the path, folder name, user name, password, etc. for the FTP server are unknown,contact you Network

Administrator.

Check whether you need to use PASV mode.

If a firewall is installed between the machine and the FTP server, you must set PASV mode.

Configuring FTP PASV mode

Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.

Disabling HTTP Communication

Disabling Remote UI

Registering Address Book from Remote UI

㻟㻤㻜㻌㻛㻌㻣㻟㻡