Operation Manual

0SCJ-0HU
If AirPrint Cannot Be Used
If AirPrint cannot be used, try taking the following solutions.
Make sure that the machine is turned ON. If the machine is turned ON, first turn it OFF, then wait for at least 10 seconds and then
turn it back ON to check if the problem is solved.
Make sure that no error messages are displayed on the machine.
Make sure that Apple devices and the machine are connected to the same LAN. If the machine is turned ON, it may take several
minutes before the machine is ready for communication.
Make sure that Bonjour on Apple devices is enabled. For details, see the instruction manual for the device, or contact your
manufacturer.
Make sure that the machine is configured to enable printing/scanning/faxing from a computer even when no department ID and
password are entered.
Setting the Department ID Management for Printing or Faxing from the Computer
For printing, make sure that the paper is loaded in the machine and the machine has sufficient toner cartridge remaining.
Loading
Paper
Replacing Toner Cartridges
For scanning, make sure that the machine's setting for Network Link Scan is <On>.
Configuring Network Link Scan Settings
About fax problems, see
Faxing/Telephone Problems (MF729Cx / MF728Cdw / MF628Cw).
㻟㻞㻝㻌㻛㻌㻣㻟㻡