Operation Manual

<Off>

The area 1/5" (4 mm) from the top, bottom, left and right edges of the paper is not printable.

<On>

The printable area is enlarged to the top, bottom, left, and right edges of the paper.

If you select <On>, images on the edge of the paper may not print properly.

This setting specifies whether to print annotations in the PDF file.

You can print password protected PDF files by entering the password required to open them.

<Other>

Specify the data processing method to reproduce halftones.

See

Halftones for the description of the setting.

If the text object is black (R=G=B=0%, C=M=Y=100% or Bk=N%, C=M=Y=0% or Bk=100%), this setting specifies

whether the text is printed using black only.

See

Pure Black Text for the description of the setting.

This setting allows you to choose a specific way to print black text when printing black text over a color background or

graphics.

See

Black Overprint for the description of the setting.

Select the source profile for color matching to print RGB data, according to the monitor you are using.

See

RGB Source Profile for the description of the setting.

This setting allows you to specify the simulation target to print the CMYK (Cyan Magenta Yellow blacK) data.

The machine converts CMYK data into a device dependent CMYK color model based on the simulation target selected in

the CMYK Simulation Profile.

See

CMYK Simulation Profile for the description of the setting.

This setting allows you to define how device dependent gray data is processed.

See

Use Grayscale Profile for the description of the setting.

This setting allows you to define the profile that is appropriate for the data you are going to print. It is applied to all

data in the print job, so make sure the selected profile is right for your job.

See

Output Profile for the description of the setting.

㻞㻟㻥㻌㻛㻌㻣㻟㻡