Operation Manual

Other Network Settings
1W2X-018
Congur
e the following items according to your network environment.
Conguring FTP P
ASV Mode(P. 73)
Conguring SNTP
(P. 73)
Monitoring the Machine from the Device Management Systems(P. 74)
Conguring FTP PASV Mode
PASV is an FTP communication mode used for le transfer. To connect to an FTP server through a rewall, you must
use PASV mode. First check that the PASV mode is set on the FTP server.
Whether P
ASV mode is used for FTP depends on your network environment and the settings on the FTP
server to which data is being sent. For more information, contact your Network Administrator.
<Menu> <Preferences> <Network> <TCP/IP Settings> <Use FTP PASV Mode> <On>
Restart the machine
Conguring SNTP
Simple Network Time Pr
otocol (SNTP) enables you to adjust the system clock by using the time server on the network.
If SNTP is used, the time server is checked at the specied intervals; therefore, the correct time can always be
maintained. The time is adjusted based on Coordinated Universal Time (UTC), so specify the time zone setting before
conguring SNTP (
Setting the Date/Time(P. 12) ). SNTP settings can be specied via the Remote UI.
The SNTP of the machine supports both NTP (version 3) and SNTP (versions 3 and 4) servers.
For mor
e information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 424) .
1
Start the Remote UI and log in to System Manager Mode.
Starting Remote
UI(P
. 416)
2
Click [Settings/Registration] on the Portal page.
Remote UI Screen(P. 417)
3
Select [Network Settings] [SNTP Settings].
4
Click [Edit].
Setting Up
73