Operation Manual

CA certificates.
A key pair cannot be deleted if it is currently used for some purpose, such as when "[SSL]" or "[IEEE 802.1X]" is displayed
under [Key Usage]. In this case, disable the function or replace the key pair before deleting it. The preinstalled CA certificate
cannot be deleted.
Disabling or enabling the preinstalled CA certificates
Click [Disable] on the right of the preinstalled CA certificate you want to disable. To enable the certificate again, click [Enable]
on the right of the certificate.
Click [Install].
Deleting a key pair or CA certificate
Click [Delete] on the right of the file you want to delete, and then click [OK].
Click [Browse], specify the file to install, and click [Start Installation].
The key pair or CA certificate is installed in the machine.
Register the key pair or CA certificate.
Registering a key pair
1
Click [Register] on the right of the key pair you want to register.
2
Enter the name of the key pair and password, and then click [OK].
[Key Name]
Enter up to 24 alphanumeric characters for the name of the key pair to be registered.
[Password]
Enter up to 24 alphanumeric characters for the password of the private key set for the file to be registered.
Registering a CA certificate
5
6
7
㻠㻣㻡㻌㻛㻌㻣㻟㻡