Operation Manual

Conguring Basic E-Mail Settings(P
. 360)
Conguring E-Mail Communication Settings
(P. 364)
E-mail sending was impossible because an incorrect domain name was set.
● Check the domain name, and correct the setting.
Conguring DNS(P
. 378)
E-mail sending was impossible because the machine was not connected to a network correctly.
● Check whether the machine is properly installed and correctly connected to the network.
Installation/Settings Problems(P. 567)
#753
Scanned data could not be sent as e-mail or stored in the shared folder because the LAN cable is
disconnected.
● Check whether the LAN cable is connected corr
ectly.
Connecting to a Wired LAN(P. 319)
#755
Scanned data could not be sent as e-mail or stored in the shared folder because TCP/IP was not working
corr
ectly.
● Check <TCP/IP Settings>, and set correctly.
Network Settings (P. 474)
An IP addr
ess is not set.
● Set the IP address correctly.
Setting IP Addresses(P. 337)
The machine cannot communicate with de
vices on a network immediately after the machine starts up
because the waiting time for the start of the communication is set.
● The machine cannot start communicating immediately after it is turned ON. Wait until the set time for
<Waiting Time for Connection at Startup> passes after turning ON the machine, and send again.
Setting a Wait Time for Connecting to a Network(P. 377)
#801
When communicating with an SMTP server to send an e-mail, a timeout error occurred from the server.
● Check whether SMTP is running on the network corr
ectly.
● Check whether the machine is properly installed and correctly connected to the network.
Installation/Settings Problems(P. 567)
When communicating with the SMTP server, an err
or returned from the server.
● Check whether the SMTP server is set correctly.
A destination is not set correctly.
● Check whether the destination is set correctly.
Troubleshooting
562