Operation Manual

0KCY-01C

Loading Paper

You can load the paper into the paper drawer or manual feed slot. Load the paper you usually use into the paper drawer. The paper

drawer is convenient when using large amounts of paper. Use the manual feed slot when you temporarily use size or type of paper that

is not loaded in the paper drawer. See

Paper for available paper sizes.

Paper Type and Setting for the Machine

See the table below to specify the paper settings according to the type and weight of the paper to load into the paper source. For

more information about how to specify the paper settings on the machine, see

Specifying Paper Size and Type. For the amount

of paper that can be loaded in each paper source, see

Paper.

Paper Type Paper Weight

Paper Setting

on the Machine

Plain paper 60 to 90 g/m²

Recycled paper 60 to 90 g/m² <Recycled>

Color paper 60 to 90 g/m² <Color>

Heavy paper

90 to 120 g/m² <Heavy 1 (90-120 g/m²)>

120 to 163 g/m² <Heavy 2 (120-163 g/m²)>

Bond paper

60 to 90 g/m² <Bond 1 (60-90 g/m²)>

90 to 120 g/m² <Bond 2 (90-120 g/m²)>

120 to 163 g/m² <Bond 3 (120-163 g/m²)>

Envelope

Transparency

Label

If set to <Plain> and that printout is curled, specify <Plain L> and print again.

Do not use the following types of paper:

Wrinkled or creased paper

Curled or rolled paper

Torn paper

Damp paper

Very thin paper

Paper printed by a thermal transfer printer

Highly textured paper

Glossy paper

Paper handling and storage

Store the paper on a flat surface.

Keep the paper wrapped in its original package to protect the paper from moisture or dryness.

Do not store the paper in such a way that may cause it to curl or fold.

Do not store the paper vertically or stack too much paper.

㻟㻥㻌㻛㻌㻠㻣㻡