Service manual

Chapter 4
4-1
4.1 Periodically Replaced Parts
4.1.1 Periodic Replacement Parts
0012-0920
No parts require periodic replacement in this printer.
4.2 Periodical Service
4.2.1 Periodical Service
0012-0925
The printer has no parts that require periodic servicing.
4.3 Cleaning
4.3.1 Items Requiring Cleaning
0012-0926
T-4-1
Before starting cleaning work, be sure to turn off the power and disconnect the power plug to avoid fires and electric shocks.
4.3.2 Cleaning Method (external covers)
0012-0927
Moisten a soft cloth with water or solution of mild detergent, making sure it is well wrung; then, wipe the soiling. If you have used detergent, be sure to remove its
residue using a soft, moist cloth.After removing all soiling, dry wipe the area with a soft, dry cloth.
Work by Item Intervals
User External covers As needed (when soiled)
Platen glass When smears appear on image scanned from
the platen galss
Rear surface of the platen glass cover When smears appear on image scanned from
the platen galss
Service technician Cassette pickup roller When paper pickup performance has lowered
Cassette separation pad When paper separation performance has
lowered
Feed roller When paper feed performance has lowered
Transfer charging roller When the back of paper tends to become soiled;
or, when a white spot appears in the images at
intervals of about 46 mm
Static eliminator When dots appear in images
Paper feed guide When the back of paper tends to become soiled
Fixing entrance guide When paper tends to become soiled; when a
black line appears vertically at irregular
intervals; when paper jams; when paper
wrinkles
Fixing film When images tend to become soiled at intervals
of about 57 mm
Fixing pressure roller When the back of paper shows traces at
intervals of about 64 mm; when fixing faults
occur; when paper jams; when paper wrinkles