Operation Manual

Starting Up Speed Dial Utility2

Important

• Before starting up Speed Dial Utility2, make sure that the printer is connected to the computer correctly.

• Do not plug in or unplug any cables while the printer is in operation, or when the computer is in sleep or

standby mode.

• If your printer is compatible with LAN connection, make sure that the printer is connected to the

computer with LAN connection to use Speed Dial Utility2 via LAN connection.

• The password entry screen may appear during startup or operation. If it appears, enter the

administrator password, and then click OK. If you do not know the administrator password, contact the

administrator of the printer.

Follow the procedure below to start up Speed Dial Utility2.

Select Applications on Go menu of Finder.

Double-click Canon Utilities folder.

Double-click Speed Dial Utility2 folder.

Double-click Speed Dial Utility2.

Speed Dial Utility2 starts up.

Note

• You can also start up Speed Dial Utility2 from Quick Utility Toolbox.

794