Operation Manual

Using On Hook Dial Function
Follow the procedure below to send faxes with the on hook dial function.
Important
It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect
registration of fax/telephone numbers. When you send important documents, we recommend that you
send them after speaking on the telephone.
Sending Fax after Speaking on Telephone
With manual transmission, you cannot use the platen glass to load documents. Load the documents in
the ADF.
When loading document on the platen glass, send a fax with automatic transmission.
Sending Faxes by Entering Fax/Telephone Number
Note
You can use the on hook dial function only when Hook key setting in Security control under FAX
settings is set to Enable.
Security control
For details on the basic sending operations:
Sending Faxes by Entering Fax/Telephone Number
1.
Make sure that printer is turned on.
2.
Load documents in ADF.
3.
Flick HOME screen, and then tap FAX.
Using the Operation Panel
The Fax standby screen is displayed.
4. Change send settings as necessary.
Setting Items for Sending Faxes
5. Tap .
6.
Specify a recipient.
Specify the recipient with the one of the following methods.
By specifying with the recipient registered to the printer:
Select the registered recipient by tapping Directory.
Sending Fax to Registered Recipient
959