Operation Manual

If you select ON, the printer transmits the fax after confirming the dial tone.
Note
• This setting may not be available depending on the country or region of purchase.
• Pause time settings
Sets the length of pause time for each when you enter "P" (pause).
• TTI position
Selects the position of the sender information (outside or inside the image area).
• Remote RX
Enables/disables remote reception.
If you select ON, you can specify the remote reception ID.
Remote Reception
• Color transmission
When faxing color documents using the ADF, selects whether to convert them into black & white data
if the recipient's fax device does not support color faxing.
If you select Disconnect, the printer does not send color documents when the recipient's fax device
does not support color faxing.
• RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON, you can select the image reduction direction.
• Adv. communication settings
◦ ECM TX
Selects whether to send faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
◦ ECM RX
Selects whether to receive faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
◦ TX start speed
Selects the fax transmission speed.
The fax transmission start speed will be faster as the value is bigger.
When the telephone line condition or connection is poor, selecting a lower transmission start
speed may solve transmission problems.
◦ RX start speed
Selects the fax reception speed.
The fax reception start speed will be faster as the value is bigger.
295