Operation Manual

Important
Large items (such as A4 size photos) that cannot be
placed away from the edges/arrow (alignment mark) of
the platen may be saved as PDF files. To save in a for-
mat other than PDF, scan by specifying the data for-
mat.
Placing Multiple Items:
Allow 0.4 inch (1 cm) or more space between the edges (di-
agonally striped area) of the platen and items, and between
items. Portions placed on the diagonally striped area can-
not be scanned.
more than 0.4 inch (1 cm)
Note
You can place up to 12 items.
Positions of slanted items (10 degrees or less) are cor-
rected automatically.
Important
For the portions in which items cannot be scan-
ned, see Loading Originals.
Placing Documents (ADF (Auto Document Feeder))
Important
Do not leave thick items on the platen when scanning from the ADF. May result in paper jam.
Place and align documents of the same size when scanning two or more documents.
For supported document sizes when scanning from the ADF, see Supported Originals.
1. Open the document tray.
2. Place the documents on the ADF, then adjust the document guides to the width of the
documents.
867